Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CONPROCO CORPORATION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CONPROCO CORPORATION in 655 RIVER ROAD, BOW, NH 03304 (NAICS 327390). OSHA activity number 347874281.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Conproco Corporation — free Get an email when a new federal OSHA severe-injury report for Conproco Corporation is published. One employer, no account, unsubscribe in one click.
Site address
655 RIVER ROAD
City
BOW
State
NH
ZIP
03304
Mailing
388 HIGH STREET, SOMERSWORTH, NH 03878
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327390
Employees
20
Ownership type
A

6 citations on file for this inspection.

1910.23 C08

Serious Gravity 5 1 instance 4 exposed
Issued
Mar 20, 2025
Abate by
Mar 26, 2025
Penalty
Initial $4,729 · Current $2,365 Reduced
29 CFR  1910.23(c)(8): The cap (if equipped) and top step of a stepladder were used as steps:  Palletizer Robot Conveyor - Employees were utilizing the top step of the step ladder to access the conveyor when clearing jams.
Recent events (2)
  • — I (S) $2364.5
  • — Z (S) $4729

1910.23 C11

Serious Gravity 5 3 instances 10 exposed
Issued
Mar 20, 2025
Abate by
Mar 26, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.23(c)(11):  Portable ladders used to gain access to an upper landing surface have side rails that extend at least 3 feet (0.9 m) above the upper landing surface (see Figure D-1);  Palletizer Robot Conveyor - Employees were utilizing a step ladder to access the conveyor that did not extend at least 3 feet above the upper landing surface.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.28 B01 I

Serious Gravity 5 2 instances 10 exposed
Issued
Mar 20, 2025
Abate by
Mar 26, 2025
Penalty
Initial $4,729 · Current $2,365 Reduced
29 CFR  1910.28(b)(1)(i): Unprotected sides and edges:  The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level was protected from falling:  Palletizer Robot Conveyor - Employees were working on the conveyor to clear jams without adequate fall protection.
Recent events (2)
  • — I (S) $2364.5
  • — Z (S) $4729

1910.28 B11 II

Serious Gravity 1 1 instance 10 exposed
Issued
Mar 20, 2025
Abate by
May 6, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.28(b)(11)(ii): Each flight of stairs having at least 3 treads and at least 4 risers was not equipped with stair rail systems and handrails in accordance with TABLE D-2 of this part:  Plant - The stairway next to the Reclaim Elevator was not equipped with a stair rail system on each side.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 20, 2025
Abate by
Apr 24, 2025
Penalty
Initial $4,729 · Current $2,365 Reduced
29 CFR  1910.219(d)(1): Pulleys, any parts of which were seven (7) feet or less from the floor or working platform, were not guarded in accordance with the standards specified in paragraphs (m) and (o) of this section:  Reclaim Elevator - Employees performing activities such as but not limited to cleaning and sweeping of fugitive dust were exposed to an inadequately guarded belt and pully that was not fully enclosed to prevent accidental contact.
Recent events (2)
  • — I (S) $2364.5
  • — Z (S) $4729

1910.219 E03 I

Serious Gravity 5 1 instance 5 exposed
Issued
Mar 20, 2025
Abate by
Apr 24, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.219(e)(3)(i): Vertical and inclined belts were not enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section:  Reclaim Elevator - Employees performing activities such as but not limited to cleaning and sweeping of fugitive dust were exposed to an inadequately guarded belt and pully that was not fully enclosed to prevent accidental contact.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Conproco Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347874281.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.