BIDDEFORD, ME —
OSHA Inspection: COUNT AND CRUSH, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of COUNT AND CRUSH, LLC in 565 ELM STREET, BIDDEFORD, ME 04005 (NAICS 423930). OSHA activity number 347883639.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COUNT AND CRUSH, LLC
- Site address
- 565 ELM STREET
- City
- BIDDEFORD
- State
- ME
- ZIP
- 04005
- Mailing
- 100 WATERMAN DRIVE SUITE 301, PORTLAND, ME 04106
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- Employees
- 65
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Dec 9, 2024
- Penalty
- Initial $6,844 · Current $3,422 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Establishment - The employee did not develop lock-out/tag-out procedures for the Anker sorting machines, conveyor lines, and glass breakers.
Recent events (2)
- — I (S) $3422
- — Z (S) $6844
1910.147 C07 I
- Issued
- Dec 9, 2024
- Penalty
- Initial $11,409 · Current $5,705 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: Establishment - The employer failed to provide adequate lockout tagout training to ensure employees understood the requirements and needs of the hazardous energy control program.
Recent events (2)
- — I (S) $5704.5
- — Z (S) $11409
1910.219 C04 I
- Issued
- Dec 9, 2024
- Penalty
- Initial $15,970 · Current $7,985 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft ends did not present a smooth edge and end and projected more than one half the diameter of the shaft: Plant 2 - The employer was operating a conveyor on the sorting line with a keyed half-inch shaft protruding three inches past the housing.
Recent events (2)
- — I (S) $7985
- — Z (S) $15970
1910.219 C04 II
- Issued
- Dec 9, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(ii): The unused keyway(s) of projecting shaft end(s) were not filled up or covered: Plant 2 - The employer was operating a conveyor on the sorting line with a half-inch shaft protruding Three inches past the housing with an exposed keyway.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Dec 9, 2024
- Penalty
- Initial $15,970 · Current $7,985 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulleys with parts seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Plant 1 & 2 - Pulleys on nine Anker sorting machines and six glass breakers were not guarded to prevent employee contact.
Recent events (2)
- — I (S) $7985
- — Z (S) $15970
1910.219 E01 I
- Issued
- Dec 9, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both run 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): Plant 1 & 2 - Conveyor belts on nine Anker sorting machines located approximately 20-30 inches from the floor were not guarded to prevent employee contact.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B01 II
- Issued
- Dec 9, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: Establishment - Unused electrical openings were not effectively closed in the following location: a. Junction box Plant A on the dividing wall between plants.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Count and Crush, LLC
View Count and Crush, LLC's full OSHA safety record →
More inspections in this industry (NAICS 423930)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347883639.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.