OSHA Inspection: CHUCKING MACHINE PRODUCTS INC

Issued

Feb 6, 2025

Abate by

Feb 26, 2025

Penalty

Initial $6,620 · Current $6,620

General-duty citation text

29 CFR  1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolate.  (a) Production - On or about January 2, 2025, the employer did not ensure employees who serviced equipment were trained as "authorized" employees. Employees assigned the task of changing out saw blades on the DoAll 330 Horizontal bandsaw were not provided with the knowledge and skills needed for the safe application, usage, and removal of energy control.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Feb 6, 2025

Abate by

Feb 19, 2025

Penalty

Initial $6,620 · Current $0 Reduced

General-duty citation text

29 CFR  1910.147(d):The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6):  (a) Production Department: On or about January 2, 2025, employees were exposed to machine hazards associated with moving parts when changing out saw blades on equipment such as but not limited to the DoAll 330 Horizontal Saw. The employer did not implement energy control application steps such as but not limited to lockout tagout when performing these tasks [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving dissipation machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.