WINTHROP, MA —
OSHA Inspection: ITALIAN DESIGN MASONRY LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ITALIAN DESIGN MASONRY LLC in 1001 SHIRLEY STREET, WINTHROP, MA 02152 (NAICS 238140). OSHA activity number 347909236.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ITALIAN DESIGN MASONRY LLC
- Site address
- 1001 SHIRLEY STREET
- City
- WINTHROP
- State
- MA
- ZIP
- 02152
- Mailing
- 4 VINEGAR HILL DRIVE, SAUGUS, MA 01906
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 2
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.451 F07
- Issued
- Mar 6, 2025
- Abate by
- Mar 14, 2025
- Penalty
- Initial $4,965 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:; Such activities were not performed only by experienced and trained employees selected for such work by the competent person. Location: Worksite On or about December 3, 2024 an employee was exposed to a fall hazard over 7 feet while working on frame scaffolding to perform masonry activities, where the employer did not ensure that the scaffolding was erected under the direction of a competent person.
Recent events (2)
- — I (S) $0
- — Z (S) $4965
1926.451 B01
- Issued
- Mar 6, 2025
- Abate by
- Mar 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(b)(1):Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii). Location: Worksite On or about December 3, 2024, employees were exposed to fall hazards of over 7 feet while working on frame scaffolding performing masonry activities, where the employer did not ensure that the working level was fully planked.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 C02 I
- Issued
- Mar 6, 2025
- Abate by
- Mar 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(i):Footings were not level, sound, rigid, and capable of supporting the loaded scaffold without settling or displacement. Location: Worksite On or about December 3, 2024, employees were exposed to fall hazards of 7 feet while working on the frame scaffolding to perform masonry activities, where the employer did not ensure that the scaffold was stable.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.20 B02
- Issued
- Mar 6, 2025
- Abate by
- Mar 14, 2025
- Penalty
- Initial $3,547 · Current $500 Reduced
General-duty citation text
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers. Location: Worksite On or about December 3, 2024, employees were exposed to respirable crystalline silica hazards while using a cut-off machine, rotary hammer, and other hand tools to remove bricks in order to widen the window opening of the building, where the employer did not ensure that proper engineering controls and work practices were in place, as per requirements of Table 1 of the silica standard.
Recent events (2)
- — I (O) $500
- — Z (S) $3547
1926.1153 G01
- Issued
- Mar 6, 2025
- Abate by
- Mar 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(g)(1):The employer did not establish and implement a written exposure control plan. Location: Worksite On or about December 3, 2024, employees were exposed to respirable crystalline silica dust hazards while utilizing the cut-off machine and rotary hammer to dry-cut the brick on the building to widen the window, where the employer had not established nor implemented a written exposure control plan.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 I01
- Issued
- Mar 6, 2025
- Abate by
- Mar 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(i)(1):The employer did not ensure that each employee is trained in accordance with the provisions of HCS and paragraph (i)(2) of this section. Location: Worksite On or about December 3, 2024, employees were exposed to respirable crystalline silica dust hazards while utilizing the cut-off machine and rotary hammer to dry-cut the brick to widen the window, where the employer had not trained the employees on respirable crystalline silica, as required, in order to comply with the hazard communication standard
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 238140)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347909236.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.