MCDONOUGH, GA —
OSHA Inspection: IFCO SYSTEMS US, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of IFCO SYSTEMS US, LLC in 100 CONSTITUTION DRIVE, SUITE B, MCDONOUGH, GA 30253 (NAICS 424130). OSHA activity number 347918922.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IFCO SYSTEMS US, LLC
- Site address
- 100 CONSTITUTION DRIVE, SUITE B
- City
- MCDONOUGH
- State
- GA
- ZIP
- 30253
- Mailing
- 100 CONSTITUTION DRIVE, SUITE B, MCDONOUGH, GA 30253
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424130
- Employees
- 85
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 27, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $8,276 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a.) On or about December 5, 2024 in the production area, employees are exposed to struck by, crushing, and caught in between hazards such as those created by motions of the horizontal bar within machine enclosure of the palletizer machine in that the Lock Out Tag Out procedure was not documented effectively and utilized.
Recent events (2)
- — I (S) $0
- — Z (S) $8276
1910.147 C07 I A
- Issued
- Jan 27, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $6,620 · Current $3,972 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation a) Production area - On or about 12/05/2024, and at times prior, the employer exposed employees to amputation hazards, struck by hazards, and caught in between hazards in that, the employer failed to ensure that training was provided to authorized employees while providing service and maintenance to equipment, such as but not limited to palletizer machine while clearing pallet jams.
Recent events (2)
- — I (O) $3972
- — Z (S) $6620
1910.147 C07 I B
- Issued
- Jan 27, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B):Each affected employee shall be instructed in the purpose and use of the energy control procedure. a) Production area - On or about 12/05/2024, and at times prior, the employer exposed employees to amputation hazards, struck by hazards, and caught in between hazards in that, the employer failed to ensure that training was provided to affected employees while operating equipment, such as but not limited to palletizer machine when jams occur.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Jan 27, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $6,620 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees. (a) In the production area; On or about December 5, 2024, and at times prior, employees servicing and performing servicing and maintenance on palletizer machines were exposed to crush by and caught in between hazards, in that they did not emplace lockout or tagout (LOTO) devices to the palletizer machines.
Recent events (2)
- — I (S) $0
- — Z (S) $6620
1910.147 F03 II D
- Issued
- Jan 27, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) On or about December 5, 2024, production area, the employer exposed employees to caught in between, struck by, and crushing hazards in that employees were not trained in group lockout procedures while performing maintenance.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.29 B03
- Issued
- Jan 27, 2025
- Abate by
- Feb 21, 2025
- Penalty
- Initial $1,655 · Current $993 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): The employer did not enter each recordable injury or illness on the OSHA 300 Log and 301 Incident Report within seven (7) calendar days of receiving information that a recordable injury or illness has occurred: On or about December 5, 2024, and times prior at 1100 Constitution Drive, Suite B, McDonough, Georgia, 30253, the employer had not recorded on the OSHA 300 an incident that resulted in a work-related task needing medical attention on November 27, 2024.
Recent events (2)
- — I (O) $993
- — Z (O) $1655
More inspections at Ifco Systems US, LLC
View Ifco Systems US, LLC's full OSHA safety record →
More inspections in this industry (NAICS 424130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347918922.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.