HUTCHINS, TX —
OSHA Inspection: HENRY ANTONIO CALIX AMADOR
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HENRY ANTONIO CALIX AMADOR in 321 SOUTHAVEN BLVD, HUTCHINS, TX 75141 (NAICS 238130). OSHA activity number 347924391.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HENRY ANTONIO CALIX AMADOR
- Site address
- 321 SOUTHAVEN BLVD
- City
- HUTCHINS
- State
- TX
- ZIP
- 75141
- Mailing
- 2309 ARCADY DR., GARLAND, TX 75041
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.100 A
- Issued
- May 7, 2025
- Abate by
- Jun 3, 2025
- Penalty
- Initial $3,121 · Current $749 Reduced
General-duty citation text
29 CFR 1926.100(a):Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets. (a) On or about December 09, 2024, employees doing framing on a single-family house where overhead hazard exists by not wearing hard hats.
Recent events (2)
- — I (S) $749.04
- — Z (S) $3121
1926.102 A01
- Issued
- May 7, 2025
- Abate by
- Jun 3, 2025
- Penalty
- Initial $3,121 · Current $749 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. a. On or about December 09, 2024, employees doing framing work on a single-family home and not wearing eye protection using pneumatic nail guns. b. On or about December 09, 2024, employees doing framing work on a single-family home and not wearing eye protection using circular saws.
Recent events (2)
- — I (S) $749.04
- — Z (S) $3121
1926.304 D
- Issued
- May 7, 2025
- Abate by
- Jun 3, 2025
- Penalty
- Initial $5,462 · Current $1,311 Reduced
General-duty citation text
29 CFR 1926.304(d):Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe. (a) On or about December 09, 2024, Employees were using a Makita circular saw with an unguarded blade, the guard was pinned back with a piece of wood.
Recent events (2)
- — I (S) $1310.88
- — Z (S) $5462
1926.416 E01
- Issued
- May 7, 2025
- Abate by
- Jun 3, 2025
- Penalty
- Initial $5,462 · Current $1,311 Reduced
General-duty citation text
29 CFR 1926.416(e)(1):Worn or frayed electric cords or cables shall not be used. (a) On or about December 09, 2024, workers were exposed to electric shock hazards when using damaged extension cords and portable electric powered equipment that was powered with visibly damaged cords.
Recent events (2)
- — I (S) $1310.88
- — Z (S) $5462
1926.501 B13
- Issued
- May 7, 2025
- Abate by
- Jun 3, 2025
- Penalty
- Initial $10,923 · Current $2,622 Reduced
General-duty citation text
29 CFR 1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): (a) On or about December 09, 2024, employees engaged in framing work of more than 19-feet without fall protection. The Henry Antonio Calix Amador was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1474014, citation number 1 , item number 1 and was affirmed as a final order on 6/1/2020, with respect to a workplace located at 15832 Cherry Blossom Rd., Frisco, TX 75034
Recent events (2)
- — I (R) $2621.52
- — Z (R) $10923
1926.1053 B01
- Issued
- May 7, 2025
- Abate by
- Jun 3, 2025
- Penalty
- Initial $10,923 · Current $2,622 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Because of the portable ladder's length, the ladder side rails did not extend to at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access and the ladder was not secured at its top to a rigid surface. (a) On or about December 09, 2024, employees were accessing a two-story house employees were using the top of the step ladder as a step. The Henry Antonio Calix Amador was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.1053(b)(1), which was contained in OSHA inspection number 1474014, citation number 1 , item number 2 and was affirmed as a final order on 6/1/2020, with respect to a workplace located at 15832 Cherry Blossom Rd., Frisco, TX 75034
Recent events (2)
- — I (R) $2621.52
- — Z (R) $10923
More inspections at Henry Antonio Calix Amador
View Henry Antonio Calix Amador's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347924391.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.