CLIFTON, NJ ·
OSHA Inspection: MARBA PRODUCTS LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MARBA PRODUCTS LLC in 152 GETTY AVE, CLIFTON, NJ 07011 (NAICS 311613). OSHA activity number 347937831.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARBA PRODUCTS LLC
- Site address
- 152 GETTY AVE
- City
- CLIFTON
- State
- NJ
- ZIP
- 07011
- Mailing
- 152 GETTY AVE, CLIFTON, NJ 07011
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311613
- Employees
- 9
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.147 A02 III A
- Issued
- Jan 10, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $6,452 · Current $3,765 Reduced
General-duty citation text
29 CFR 1910.147(a)(2)(iii)(A): Employees work on power source which was not under the exclusive control of the operator. a) Production Area: An employee sustained a right index finger amputation while cleaning the onion grinder that was not unplugged and running, on or about 7/25/2024.
Recent events (2)
- · I (S) $3765
- · Z (S) $6452
1910.147 C06 I D
- Issued
- Jan 10, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $6,452 · Current $3,765 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i)(D): Where tagout was used for energy control, the periodic inspection did not include a review between the inspector and each authorized and affected employee of the employee's responsibilities under the energy control procedure: a) Production Area: The employer did not conduct periodic inspection for each authorized and affected employee of the company energy control procedures for machines such as but not limited to a Onion Grinder/Chopper Dough Mixer, Ravioli, Manti, Onion Peeler and Packing machines, on or about 7/25/2024.
Recent events (2)
- · I (S) $3765
- · Z (S) $6452
1910.147 C07 I B
- Issued
- Jan 10, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $4,610 · Current $2,635 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: a) Production Area: The employer did not provide adequate training on controlling the hazardous energy sources to an employee who is required to clean a production machine such as but not limited to a Onion Grinder/Chopper machine, on or about 7/25/2024.
Recent events (2)
- · I (S) $2635
- · Z (S) $4610
1904.4 A
- Issued
- Jan 10, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $922 · Current $0 Reduced
General-duty citation text
29 CFR 1904.4(a): The employer did not record on the OSHA Form 300 or equivalent each work-related fatality, injury, or illness case that resulted in the general recording criteria: a) Facility: The employer did not record the following workplace injury or illness on the OSHA Form 300 or equivalent. On 7/25/2024, an employee sustained work related right index finger amputation.
Recent events (2)
- · I (O) $0
- · Z (O) $922
1904.39 A02
- Issued
- Jan 10, 2025
- Abate by
- Feb 6, 2025
- Penalty
- Initial $4,610 · Current $2,635 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. a) Facility: The employer did not report to OSHA of a work-related employee amputation within twenty-four (24) hours. On 09/17/2024 OSHA was notified of a work-related injury to an employee who sustained a right finger amputation that occurred on 07/25/2024.
Recent events (2)
- · I (O) $2635
- · Z (O) $4610
More inspections in this industry (NAICS 311613)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 347937831.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.