Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: S & S MACHINE SHOP, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of S & S MACHINE SHOP, INC. in 35620 HWY 59, STAPLETON, AL 36578 (NAICS 332721). OSHA activity number 347963225.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch S & S Machine Shop, INC. — free Get an email when a new federal OSHA severe-injury report for S & S Machine Shop, INC. is published. One employer, no account, unsubscribe in one click.
Site address
35620 HWY 59
City
STAPLETON
State
AL
ZIP
36578
Mailing
P. O. BOX 57, STAPLETON, AL 36578
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332721
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.132 D02

Other-than-serious 1 instance 2 exposed
Issued
May 14, 2025
Abate by
Jun 5, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.132(d)(2):The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed:  a)	Shop areas:  On or about January 7, 2025, and at times prior to, the employer failed to verify that the required workplace hazard assessment had been performed through a written certification that identified the workplace evaluated, the person certifying that the evaluation had been performed, the date(s) of the hazard assessment, and which identified the documents as a certification of hazard assessment.
Recent events (1)
  • — Z (O) $0

1910.178 L02 II

Other-than-serious 1 instance 2 exposed
Issued
May 14, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(2)(ii):The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace.  a)	Shop and yard areas: On or about January 7, 2025, and at times prior to, the employer did not ensure powered industrial truck operators had completed training consisting of a combination of formal instruction and driver evaluation as required by the standard.
Recent events (1)
  • — Z (O) $0

1910.1200 E01

Other-than-serious 1 instance 2 exposed
Issued
May 14, 2025
Abate by
Jun 5, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(e)(1):Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   a) Facility wide:  On or about January 7, 2025, and at times prior to, the employer did not provide a written hazard communication program for employees utilizing hazardous chemicals such as but not limited to propane and lubricants.
Recent events (1)
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 2 exposed
Issued
May 14, 2025
Abate by
Jun 5, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(g)(8):  The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s).  a)Facility wide:  On or about January 7, 2025, and at times prior to, the employer did not ensure safety data sheets were maintained and readily available for employees utilizing hazardous chemicals such as but not limited to propane and lubricants.
Recent events (1)
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 2 exposed
Issued
May 14, 2025
Abate by
Jun 5, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a)Facility wide:  On or about January 7 , 2025, and at times prior to, the employer did not provide hazard communication training to its employees utilizing hazardous chemicals such as but not limited to propane and lubricants.
Recent events (1)
  • — Z (O) $0

View S & S Machine Shop, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347963225.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.