ELMIRA, NY —
OSHA Inspection: ELMIRA STAMPING & MFG. CORP.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ELMIRA STAMPING & MFG. CORP. in 1704 CEDAR STREET, ELMIRA, NY 14904 (NAICS 332119). OSHA activity number 347965212.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELMIRA STAMPING & MFG. CORP.
- Site address
- 1704 CEDAR STREET
- City
- ELMIRA
- State
- NY
- ZIP
- 14904
- Mailing
- 1704 CEDAR STREET, ELMIRA, NY 14904
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332119
- Employees
- 23
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C06 I
- Issued
- May 29, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $4,729 · Current $6,620
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about 01/07/2025 at the site located at 1704 Cedar Street, Elmira, NY: The employer did not conduct periodic inspections of the equipment annually to ensure the documented procedures and standard were being followed exposing employees to caught in hazards.
Recent events (2)
- — I (S) $6620
- — Z (S) $4729
1910.147 C07 I
- Issued
- May 29, 2025
- Penalty
- Initial $6,620 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: a) On or about 01/07/2025 at the site located at 1704 Cedar Street, Elmira, NY: Employees were not provided training to ensure the employees acquired the knowledge and skills required for the application, usage and removal of energy control devices.
Recent events (2)
- — I (S) $0
- — Z (S) $6620
1910.217 D01 I
- Issued
- May 29, 2025
- Abate by
- Jun 25, 2025
- Penalty
- Initial $6,620 · Current $6,620
General-duty citation text
29 CFR 1910.217(d)(1)(i):The employer did not use dies and operating method(s) designed to control or eliminate hazards to operating personnel on mechanical power press(es). a) On or about 01/02/2025 at the site located at 1704 Cedar Street, Elmira, NY: Employees were exposed to crush hazards when using dies and operating methods that did not control or eliminate hazards on mechanical power presses.
Recent events (2)
- — I (S) $6620
- — Z (S) $6620
1910.217 D01 II
- Issued
- May 29, 2025
- Abate by
- Jun 25, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(d)(1)(ii):Hand tool(s) were not used for freeing and removing stuck work or scrap pieces from the die(s) of mechanical power press(es) so that no employee needed to reach into the point of operation for such purposes: a) On or about 01/02/2025 at the site located at 1704 Cedar Street, Elmira, NY: Employees reached into the point of operation and did not use hand tools for removing work pieces from the die(s) of the mechanical presses.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 E01 I
- Issued
- May 29, 2025
- Penalty
- Initial $6,620 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(e)(1)(i):A program of periodic and regular inspections of mechanical power press(es) was not established and followed to ensure that all parts, auxiliary equipment and safeguards were in a safe operating condition and adjustment: a) On or about 01/02/2025 at the site located at 1704 Cedar Street, Elmira, NY: The employer did not have programs of periodic and regular inspections of power presses to ensure all parts were in safe operating condition.
Recent events (2)
- — I (S) $0
- — Z (S) $6620
1910.1200 H01
- Issued
- May 29, 2025
- Penalty
- Initial $2,837 · Current $2,128 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) On or about 01/07/2025 at the site located at 1704 Cedar Street, Elmira, NY: Employees were not provided training and information for chemicals in their work area including but not limited to Shop Pro Brake Parts Cleaner, Fasttrac Pellets, Vanishing Compound 40 and Houghto-Draw 7060.
Recent events (2)
- — I (S) $2128
- — Z (S) $2837
More inspections in this industry (NAICS 332119)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347965212.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.