OSHA Inspection: COLLINGSWOOD ARCHITECTURAL MILLWORK INC.

Issued

Apr 28, 2025

Abate by

May 22, 2025

Penalty

Initial $2,837 · Current $2,128 Reduced

General-duty citation text

29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors or potentially injurious light radiation.  a) Collingswood Architectural Millwork Inc. -  Milling area:  The employer did not ensure employees were wearing safety glasses while using the compressed air set at approximately 60 P.S.I. while cleaning equipment and products, occurred on or about 01/08/2025.  b) Collingswood Architectural Millwork Inc. -  Assembly area:  The employer did not ensure employees were wearing safety glasses while using hand tools including but not limited to sanding equipment, occurred on or about 01/08/2025.  c) Collingswood Architectural Millwork Inc. -  Finishing and Prep area:  The employer did not ensure employees were wearing safety glasses while using hand tools including but not limited to sanding and drilling equipment, and while using saws, occurred on or about 01/08/2025.

Issued

Apr 28, 2025

Abate by

May 22, 2025

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.242(b):  Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.   a) Collingswood Architectural Millwork Inc. -  Milling area:  Employees were using the compressed air set at approximately 60 P.S.I. to clean equipment and product, occurred on or about 01/08/2025.

Issued

Apr 28, 2025

Abate by

May 22, 2025

Penalty

Initial $4,729 · Current $3,547 Reduced

General-duty citation text

29 CFR  1910.147(c)(1):  The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment was isolated from the energy source and rendered inoperative.  a)  Collingswood Architectural Millwork Inc. -  Milling Department:  The employer did not establish a Lock Out/Tag Out Program consisting of energy control procedures, employee training, and periodic inspections to protect employees against the unexpected energization of equipment when servicing, making adjustments, replacing parts, cleaning or unjamming machines.  Machinery  includes, but is not limited to,  OPTIMAT, model #SKO213RC, S/N 0411491782, WEEKE/ machining Centre, S/N 0-250-17-2986, VANTAGE machine, ALIENDIRF WA8 - Sliding Table Saw, S/N 16-11-61-032, WEINING/PROFIMAT 50, S/N 10002986 and a Jet Circular Saw, occurred on or about 01/08/2025.

Issued

Apr 28, 2025

Abate by

May 22, 2025

Penalty

Initial $4,729 · Current $3,547 Reduced

General-duty citation text

29 CFR  1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    a) Collingswood Architectural Millwork Inc.- Finishing and Prep area:   The Jet Table circular saw had a missing guard covering the saw blade exposing employees to the point of operation, observed on or about 01/08/2025.  b) Collingswood Architectural Millwork Inc.- Milling area:   The Altendorf WA8 sliding table saw had a missing guard covering the saw blade exposing employees to the point of operation, observed on or about 01/08/2025.

Issued

Apr 28, 2025

Abate by

May 22, 2025

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a)  Collingswood Architectural Millwork Inc. - Throughout building and yard areas:  The company forklift operator was not recertified  to evaluate his ability to operate the Nissan N30831 Propane forklift Model # MUGLO2A30LV, Serial # UCL02-9LO811, occurred on or about 01/08/2025.

Issued

Apr 28, 2025

Abate by

May 22, 2025

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which described how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) would be met:  a) Collingswood Architectural Millwork Inc.- Throughout facility areas: The employer did not develop and implement a written hazard communication program for the chemicals used at the facility, including, but not limited to,  lubricants, paints, solvents, propane, and glue, on or about 01/08/2025.

Issued

Apr 28, 2025

Abate by

May 22, 2025

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.1200(g)(1):  The employer did not have a safety data sheet in the workplace for each hazardous chemical which they used:    a) Collingswood Architectural Millwork Inc.- Throughout facility and yard areas: The employer did not maintain safety data sheets for the chemicals used at the facility, including, but not limited to, lubricants, paints, solvents, propane and  glue, on or about 01/08/2025.

Issued

Apr 28, 2025

Abate by

May 22, 2025

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1910.1200(h)(1):  Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   a) Collingswood Architectural Millwork Inc.- Throughout facility and yard areas: The employer did not provide effective information and training for the chemicals used at the facility, including, but not limited to,  lubricants, paints, solvents, propane, and glue, on or about 01/08/2025.