Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ANGEL RENE LOPEZ SAUCEDO

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ANGEL RENE LOPEZ SAUCEDO in 7270 OLD ACTON RD., MARGARET, AL 35112 (NAICS 238160). OSHA activity number 347978975.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Angel Rene Lopez Saucedo — free Get an email when a new federal OSHA severe-injury report for Angel Rene Lopez Saucedo is published. One employer, no account, unsubscribe in one click.
Site address
7270 OLD ACTON RD.
City
MARGARET
State
AL
ZIP
35112
Mailing
263 GREEN PARK S., PELHAM, AL 35124
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 6, 2025
Penalty
Initial $4,256 · Current $2,554 Reduced
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  (a) On or about January 13, 2025, at the jobsite located at 7270 Old Acton Rd., Margaret, AL;  employee(s) were not wearing eye protection while operating a handheld circular saw to cut plywood for a residential roof.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $2553.6
  • — Z (S) $4256

1926.501 B13

Serious Gravity 10 1 instance 3 exposed
Issued
Feb 6, 2025
Penalty
Initial $4,965 · Current $2,979 Reduced
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): (a)  NOTE TO CSHO: USE THIS OPTION ONLY IN CASES WHERE THE INFEASIBILITY/GREATER HAZARD EXCEPTION IS NOT IN ISSUE.    (a) On or about January 13, 2025, at the jobsite located at 7270 Old Acton Rd., Margaret, AL; employee(s) repairing a damaged roof  were not using fall protection while working from a height of approximately 17 feet, 4 inches to the ground below.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $2979
  • — Z (S) $4965

1926.503 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Feb 6, 2025
Abate by
Mar 5, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  (a) On or about January 13, 2025, at the jobsite located at 7270 Old Acton Rd., Margaret, AL; employees engaged in  roofing activities working at heights over 6 feet without fall protection had not been trained.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347978975.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.