KILGORE, TX —
OSHA Inspection: VW MANUFACTURING SERVICES, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of VW MANUFACTURING SERVICES, LLC in 2306 TEXAS 135, KILGORE, TX 75662 (NAICS 332710). OSHA activity number 347983918.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VW MANUFACTURING SERVICES, LLC
- Site address
- 2306 TEXAS 135
- City
- KILGORE
- State
- TX
- ZIP
- 75662
- Mailing
- 2306 TEXAS 135, KILGORE, TX 75662
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 16
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A01
- Issued
- May 8, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $11,585 · Current $11,585
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about December 19, 2024 and at times prior to, employees were exposed to amputation hazards while operating the Harding Lathe Model TR-59 serial 00-A-3279 b. On or about December 19, 2024 and at times prior to, employees were exposed to amputation hazards while operating the Wallace Supply chop saw serial 7807 asset# 10525
Recent events (2)
- — I (S) $11585
- — Z (S) $11585
1910.147 C04 I
- Issued
- May 8, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $11,585 · Current $11,585
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:( a) On or about December 19, 2024, and at times prior thereto, the employer did not fully develop its machine specific lockout tagout procedures.
Recent events (2)
- — I (S) $11585
- — Z (S) $11585
1910.147 C06 I
- Issued
- May 8, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $11,585 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about December 19, 2024, and at times prior thereto energy control procedures were not inspected periodically throughout the facility.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1910.147 C07 I A
- Issued
- May 8, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $11,585 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. a. On or about December 19, 2024, and at times prior thereto, affected employees who performed the work of authorized employees did not receive training in the recognition of hazardous energy sources, the type and magnitude of the energy associated with the equipment they serviced and/or maintained.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1910.147 D04 I
- Issued
- May 8, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $11,585 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i):Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. (a) On or about December 19, 2024, and at times prior thereto, Employees had access to lathe Model # M-1950 Serial # 571808 Asset # 10501 without applying locks and/or tags to isolate the energy sources. (b) On or about December 19, 2024, and at times prior thereto, Employees had access to lathe Model# UM Serial # 7A Asset # 10500 without applying locks and/or tags to isolate the energy sources.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1904.39 A02
- Issued
- May 8, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $8,276 · Current $4,966 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. a) On or about 19 December 2024 the employer did not report a work related hospitalization to OSHA within the 24 hours.
Recent events (2)
- — I (O) $4965.6
- — Z (O) $8276
More inspections in this industry (NAICS 332710)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347983918.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.