Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ADVANCED ROADWAY MANUFACTURING INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of ADVANCED ROADWAY MANUFACTURING INC. in 1025 BLANTON STREET,, TITUSVILLE, FL 32796 (NAICS 326199). OSHA activity number 347985384.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Advanced Roadway Manufacturing INC. — free Get an email when a new federal OSHA severe-injury report for Advanced Roadway Manufacturing INC. is published. One employer, no account, unsubscribe in one click.
Site address
1025 BLANTON STREET,
City
TITUSVILLE
State
FL
ZIP
32796
Mailing
121 S. ORANGE AVE., SUITE 1500, ORLANDO, FL 32801
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.134 C01

Serious Gravity 10 1 instance 3 exposed
Issued
May 19, 2025
Abate by
Jul 8, 2025
Penalty
Initial $4,965 · Current $2,979 Reduced
29 CFR  1910.134(c)(1):The employer did not establish and implement a written respiratory protection program with worksite-specific procedures in any workplace where respirators were necessary to protect the health of the employee or whenever respirators were required by the employer:  a. On or about January 17, 2025, in the Mixing Area, Employees were exposed to health hazards while mixing flammable chemicals, in that the employer did not establish and implement a written respiratory protection program, while employees wore 3M half-facepiece respirators.
Recent events (2)
  • — I (S) $2979
  • — Z (S) $4965

1910.134 E01

Serious Gravity 10 1 instance 3 exposed
Issued
May 19, 2025
Abate by
Jul 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:(a)   a. On or about January 17, 2025, employees were exposed to respiratory hazards, in that, an employee performing Polymer Concrete with flammable chemical using a 3M Paint Project Half Face respirator was not provided with a medical evaluation to determine the employee's ability to use a respirator before the employee was required to use the respirator in the workplace place.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F02

Serious Gravity 5 1 instance 3 exposed
Issued
May 19, 2025
Abate by
Jul 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.134(f)(2):  The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter.  a. On or about January 17, 2025, Mixing Area: employees were exposed to respiratory hazards, in that, an employees performing Polymer Concrete with flammable chemical using a 3M Paint Project Half Face respirator was not fit tested prior to initial use of the respirator and at least annually thereafter.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Serious Gravity 5 1 instance 3 exposed
Issued
May 19, 2025
Abate by
Jul 8, 2025
Penalty
Initial $3,547 · Current $2,128 Reduced
29 CFR  1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:   a. On or about January 17, 2025, in the Mixing area: the employer did not develop, implement, and maintain at the workplace a written hazard communication program and explain the possible risks to respirable flammable Chemicals -specific hazards like- cancer, damage to organs, immune system effects, and permanent damage. Employees were observed performing daily tasks such as, but not limited to, performing Polymer Concrete with flammable chemical.
Recent events (2)
  • — I (S) $2128.2
  • — Z (S) $3547

1910.134 H02 I

Other-than-serious 1 instance 3 exposed
Issued
May 19, 2025
Abate by
Jun 13, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.134(h)(2)(i):Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or  were not packed or stored to prevent deformation of the facepiece and exhalation valve:  On or about January 17, 2025, in the Mixing area, the employer exposed employees to respiratory hazards, in that the respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Advanced Roadway Manufacturing INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347985384.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.