Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ONYX CONSTRUCTION SERVICES LLC

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of ONYX CONSTRUCTION SERVICES LLC in 2573 MECHANIC STREET, CATO, NY 13033 (NAICS 238130). OSHA activity number 347994071.

Watch Onyx Construction Services LLC — free Get an email when a new federal OSHA severe-injury report for Onyx Construction Services LLC is published. One employer, no account, unsubscribe in one click.
Site address
2573 MECHANIC STREET
City
CATO
State
NY
ZIP
13033
Mailing
2573 MECHANIC STREET, CATO, NY 13033
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.451 C02 IV

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $2412.00 · Current $1809.00 Reduced
29 CFR  1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:  a) On or about 1/23/2025 at the site locate at 80 General Irwin Blvd Syracuse, NY:  Employees were working on a platform attached to a Skytrak 8042 Telehandler, serial #39119,  which had been added by the employer without the manufacturers written approval.
Recent events (2)
  • — I (S) $1809
  • — Z (S) $2412

1926.602 C01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR  1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were  made without the manufacturer's written approval:  a) On or about 1/23/2025 at the site locate at 80 General Irwin Blvd Syracuse, NY:  Employees were working on a platform attached to a Skytrak 8042 Telehandler, serial #39119,  which had been added by the employer without the manufacturers written approval.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $2412.00 · Current $1809.00 Reduced
29 CFR  1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level.   a) On or about 1/23/2025 at the site locate at 80 General Irwin Blvd Syracuse, NY:  Employees were working on a scaffold platform attached to a Skytrak 8042 Telehandler, serial #39119, without the use of fall protection. Employees were exposed to a fall distance of approximately 14 feet.
Recent events (2)
  • — I (S) $1809
  • — Z (S) $2412

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2837.00 · Current $2128.00 Reduced
29 CFR  1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) On or about 1/23/2025 at the site locate at 80 General Irwin Blvd Syracuse, NY:  Employees had not been trained in recognizing fall protection hazards and how to minimize fall protection hazards when working on a platform attached to a Skytrak 8042 Telehandler, serial #39119. Employees were exposed to a fall of approximately 14 feet.
Recent events (2)
  • — I (S) $2127.75
  • — Z (S) $2837

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347994071.