CORPUS CHRISTI, TX —
OSHA Inspection: COPPERHEAD CONSTRUCTION SERVICES, LLC
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of COPPERHEAD CONSTRUCTION SERVICES, LLC in 14816 WHITECAP BLVD., CORPUS CHRISTI, TX 78418 (NAICS 236116). OSHA activity number 347996167.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COPPERHEAD CONSTRUCTION SERVICES, LLC
- Site address
- 14816 WHITECAP BLVD.
- City
- CORPUS CHRISTI
- State
- TX
- ZIP
- 78418
- Mailing
- PO BOX 12362, SAN ANTONIO, TX 78215
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236116
- Employees
- 5
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.451 C02 IV
- Issued
- Jun 16, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $4,965 · Current $4,965
General-duty citation text
29 CFR 1926.451(c)(2)(iv):Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use: On or about January 23, 2025, the employer allowed employees to use a forklift mounted basket while installing siding at elevated heights. This exposed employees to fall hazards due to: a. Fork mounted platform not designed by a registered engineer b. No constructed with complete material, holes cut into the plywood c. Anchor points made from two by four nailed across the back corner of the fork mounted box
Recent events (1)
- — Z (S) $4965
1926.451 G01 VII
- Issued
- Jun 16, 2025
- Abate by
- Jun 18, 2025
- Penalty
- Initial $4,965 · Current $4,965
General-duty citation text
29 CFR 1926.451(g)(1)(vii):Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. On or about January 23, 2025, and at times prior to, the employer did not provide their employees with fall protection when working at elevated heights. This conditions exposed employees to fall from the A-frame ladder use on the second story balcony that did not have a complete guard rail.
Recent events (1)
- — Z (S) $4965
1926.501 B01
- Issued
- Jun 16, 2025
- Abate by
- Jun 18, 2025
- Penalty
- Initial $4,965 · Current $4,965
General-duty citation text
29 CFR 1926.501(b)(1):Each employee on a walking/working surface having an unprotected side or edge which was six or more feet (1.8m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall protection system. On or about January 23, 2025, and at times prior to, the employer did not provide a proper fall protection system for their employees as they placed and removed siding.
Recent events (1)
- — Z (S) $4965
More inspections in this industry (NAICS 236116)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347996167.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.