Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: IRON & OAK DESIGNS LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of IRON & OAK DESIGNS LLC in 1416 BURLINGTON DRIVE, BISMARCK, ND 58504 (NAICS 238130). OSHA activity number 348003740.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Iron & OAK Designs LLC — free Get an email when a new federal OSHA severe-injury report for Iron & OAK Designs LLC is published. One employer, no account, unsubscribe in one click.
Site address
1416 BURLINGTON DRIVE
City
BISMARCK
State
ND
ZIP
58504
Mailing
632 WEST TURNPIKE AVENUE, BISMARCK, ND 58501
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.451 A06

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 21, 2025
Abate by
May 27, 2025
Penalty
Initial $3,547 · Current $1,774 Reduced
29 CFR 1926.451(a)(6): Scaffolds were not constructed in accordance with the design by a qualified person:    (a) On January 28, 2025, at 1416 Burlington Drive in Bismarck, North Dakota, employees engaged in construction of a commercial building were exposed to hazards associated with improperly constructed forklift mounted platform which extended approximately 37 inches on each side, past the wheelbase of the forklift.
Recent events (2)
  • — I (S) $1773.5
  • — Z (S) $3547

1926.451 C02 V

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 21, 2025
Abate by
May 27, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2)(v): Forklifts used to support scaffold platforms did not have the entire platform attached to the forks:     (a)  On January 28, 2025, at 1416 Burlington Drive in Bismarck, North Dakota, employees engaged in construction of a commercial building were exposed to exposed to potential platform failures or dislodging while working from a telehandler forklift raised platform which was not fully secured to the lifting carriage and/or forks.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 21, 2025
Abate by
May 27, 2025
Penalty
Initial $4,965 · Current $2,483 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level:    (a) On January 28, 2025, at 1416 Burlington Drive in Bismarck, North Dakota, employees engaged in construction of a commercial building were exposed to fall hazards of over 12 feet while working from a telehandler forklift raised platform without a fall protective system.
Recent events (2)
  • — I (S) $2482.5
  • — Z (S) $4965

1926.454 A

Other-than-serious 1 instance 2 exposed
Issued
Apr 21, 2025
Abate by
May 27, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:    (a) On January 28, 2025, at 1416 Burlington Drive in Bismarck, North Dakota, employees engaged in construction of a commercial building were exposed to fall hazards of over 12 feet while working from a forklift supported scaffold, open on one side, without the use of a fall protective system, without having been trained on the associated hazards and methods of abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 L06

Other-than-serious 1 instance 2 exposed
Issued
Apr 21, 2025
Abate by
May 27, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):     (a) On January 28, 2025, at 1416 Burlington Drive in Bismarck, North Dakota, employees, engaged in construction of a commercial building while on a forklift supported platform, were exposed to hazards associated with the operation of a telehandler forklift by a person who was not trained and certified.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348003740.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.