Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALDRIDGE CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ALDRIDGE CONSTRUCTION in 425 ARGO MARGARET RD., TRUSSVILLE, AL 35173 (NAICS 238160). OSHA activity number 348005091.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Aldridge Construction — free Get an email when a new federal OSHA severe-injury report for Aldridge Construction is published. One employer, no account, unsubscribe in one click.
Site address
425 ARGO MARGARET RD.
City
TRUSSVILLE
State
AL
ZIP
35173
Mailing
210 COUNTY RD. 151, ADDISON, AL 35540
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238160
Employees
2
Ownership type
A

7 citations on file for this inspection.

1926.20 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Jan 31, 2025
Abate by
Feb 27, 2025
Penalty
Initial $4,965 · Current $1,986 Reduced
29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part.  (a) On or about January 28, 2025, at the jobsite located at 425 Argo Margaret Rd., Trussville, AL; the employer did not maintain an accident prevention program to comply with the regulations of this part, which included, but were not limited to, fall protection when exposed to, but not limited to, fall hazards associated with commercial roofing installation operations.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $1986
  • — Z (S) $4965

1926.20 B02

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 31, 2025
Abate by
Feb 27, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.20(b)(2):The employer did not initiate and maintain a safety program which provides for frequent and regular inspections of jobsites, materials, and equipment to be made by a competent person (i.e., a person who is capable of identifying exist.  (a) On or about January 28, 2025, at the jobsite located at 425 Argo Margaret Rd., Trussville, AL;  the employer exposed employee(s) to fall hazards, in that they did not initiate and maintain frequent and regular inspections before performing work such as, but not limited to, commercial roofing installation operations.  n accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 31, 2025
Penalty
Initial $4,256 · Current $1,702 Reduced
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  (a) On or about January 28, 2025, at the jobsite located at 425 Argo Margaret Rd., Trussville, AL; an employee was operating a handheld drill without the use of eye protection while conducting roofing activities exposing himself to a potential eye injury from generated flying debris.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1702.4
  • — Z (S) $4256

1926.501 B11

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 31, 2025
Abate by
Feb 27, 2025
Penalty
Initial $4,965 · Current $1,986 Reduced
29 CFR  1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:   (a) On or about January 28, 2025, at the jobsite located at 425 Argo Margaret Rd., Trussville, AL; an employee was exposed to a fall hazard approximately of approximately 21 feet, 6 inches to the ground below while securing metal roofing without the use of fall protection.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $1986
  • — Z (S) $4965

1926.503 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 31, 2025
Abate by
Feb 27, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   (a) On or about January 28, 2025, at the jobsite located at 425 Argo Margaret Rd., Trussville, AL;  an employee engaged in roofing activities at heights of 6 feet or more did not recognize the fall hazard.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B01

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 31, 2025
Abate by
Feb 27, 2025
Penalty
Initial $4,965 · Current $1,986 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  (a) On or about January 28, 2025, at the jobsite located at 425 Argo Margaret Rd., Trussville, AL; employee(s) utilized  an extension ladder to access the roof without extending the ladder 3 feet or more above the landing surface.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $1986
  • — Z (S) $4965

1926.1060 A

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 31, 2025
Abate by
Feb 27, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards:  (a) On or about January 28, 2025, at the jobsite located at 425 Argo Margaret Rd., Trussville, AL;  employee(s) engaged in  roofing activities that use ladders to access roofs were not provided a ladder training program.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Aldridge Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348005091.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.