EAST PEORIA, IL —
OSHA Inspection: JOHNSON MECHANICAL SERVICE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JOHNSON MECHANICAL SERVICE, INC. in 496 W WASHINGTON, EAST PEORIA, IL 61611 (NAICS 811310). OSHA activity number 348006594.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOHNSON MECHANICAL SERVICE, INC.
- Site address
- 496 W WASHINGTON
- City
- EAST PEORIA
- State
- IL
- ZIP
- 61611
- Mailing
- 1820 RIVERWAY DRIVE, PEKIN, IL 61554
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 2
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.22 C
- Issued
- May 20, 2025
- Abate by
- Jun 30, 2025
- Penalty
- Initial $12,744 · Current $8,921 Reduced
General-duty citation text
29 CFR 1910.22(c): The employer did not provide, and ensure each employee uses, a safe means of access and egress to and from walking-working surfaces: On or about January 29, 2025, an employee was exposed to a fall hazard of approximately 5 feet while ascending and descending onto the roof to service the condenser unit because the employer did not ensure a ladder was used.
Recent events (2)
- — I (S) $8920.5
- — Z (S) $12744
1910.28 B01 I
- Issued
- May 20, 2025
- Abate by
- Jun 30, 2025
- Penalty
- Initial $12,744 · Current $8,921 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): Except as provided elsewhere in this section 29 CFR 1910.28, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i): On or about January 29, 2025, an employee was exposed to a fall hazard of approximately 15 feet while cleaning coils, changing filters, checking belts on food service equipment and using rope near the edge of the roof to hoist materials and filters because a suitable fall protection system was not used.
Recent events (2)
- — I (S) $8920.5
- — Z (S) $12744
1910.30 A03 I
- Issued
- May 20, 2025
- Abate by
- Jun 30, 2025
- Penalty
- Initial $9,104 · Current $0 Reduced
General-duty citation text
29 CFR 1910.30(a)(3)(i): The employer did not train each employee in the nature of the fall hazards in the work area and how to recognize them: On or about January 29, 2025, an employee was exposed to a fall hazard of approximately 15 feet while cleaning coils, changing filters, checking belts on food service equipment and using rope near the edge of the roof to hoist materials and filters because the employer did not provide training for the employee to recognize the fall hazards in the work area.
Recent events (2)
- — I (S) $0
- — Z (S) $9104
More inspections at Johnson Mechanical Service, INC.
View Johnson Mechanical Service, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348006594.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.