HINSDALE, IL —
OSHA Inspection: RENE MARTINEZ DBA RENE MARTINEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RENE MARTINEZ DBA RENE MARTINEZ in 531 KENNINGSTON COURT, HINSDALE, IL 60521 (NAICS 238160). OSHA activity number 348008731.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RENE MARTINEZ DBA RENE MARTINEZ
- Site address
- 531 KENNINGSTON COURT
- City
- HINSDALE
- State
- IL
- ZIP
- 60521
- Mailing
- 1856 S. PHILLIP DR. APT# 1B, MOUNT PROSPECT, IL 60056
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 2
- Ownership type
- A
Citations
4 citations on file for this inspection.
1903.19 C01
- Issued
- May 7, 2025
- Abate by
- Jun 27, 2025
- Penalty
- Initial $398 · Current $398
General-duty citation text
29 CFR 1903.19(c)(1): The employer failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Rene Martinez dba Rene Martinez. failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation Number Item Number Abatement Date 01 02 03/28/2025 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (O) $398
1926.502 D17
- Issued
- Mar 7, 2025
- Penalty
- Initial $2,837 · Current $2,837
General-duty citation text
29 CFR 1926.502(d)(17):The attachment point of the body belt was not located in the center of the wearer's back. The attachment point of the body harness was not located in the center of the wearer's back near shoulder level, or above the wearer's head. On or about January 29, 2025, employee performing work at heights had the lanyard attached to the front side of their harnesses, exposing employee to the hazards and injuries associated with using a personal fall arrest systems improperly. No abatement certification or documentation is required for this item.
Recent events (1)
- — Z (S) $2837
1926.503 B01
- Issued
- Mar 7, 2025
- Abate by
- Mar 28, 2025
- Penalty
- Initial $2,128 · Current $2,128
General-duty citation text
29 CFR 1926.503(b)(1): The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training. On or about January 29, 2025, the employer did not certify that employees had been trained to recognize and minimize fall hazards. Employees were exposed to fall hazards in excess of 20 feet while performing roof installation activities without utilizing adequate fall protection. Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (1)
- — Z (S) $2128
1926.1053 B01
- Issued
- Mar 7, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grab rail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support. On or about January 29, 2025, the portable ladder used to access the roof level did not extend at least three (3') feet above the upper landing surface, thereby exposing employees to fall hazard. No abatement certification or documentation is required for this item.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348008731.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.