NEW PHILADELPHIA, OH —
OSHA Inspection: GRADALL INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GRADALL INDUSTRIES, INC. in 406 MILL AVENUE SW, NEW PHILADELPHIA, OH 44663 (NAICS 333120). OSHA activity number 348028192.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GRADALL INDUSTRIES, INC.
- Site address
- 406 MILL AVENUE SW
- City
- NEW PHILADELPHIA
- State
- OH
- ZIP
- 44663
- Mailing
- 406 MILL AVENUE SW, NEW PHILADELPHIA, OH 44663
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333120
- Employees
- 340
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.179 L03 I
- Issued
- Jun 24, 2025
- Abate by
- Jul 7, 2025
- Penalty
- Initial $16,550 · Current $11,585 Reduced
General-duty citation text
29 CFR 1910.179(l)(3)(i): Any unsafe conditions disclosed by the inspection requirements of paragraph (j) of this section shall be corrected before operation of the crane is resumed. Adjustments and repairs shall be done only by designated personnel. a. Gradall Industries, Inc located at 406 Mill Avenue SW, New Philadelphia, OH 44663 (Assembly Area) on or about February 11, 2025, and at times prior, employees operated a Detroit Hoist 5 ton overhead bridge crane (EQ #31452, Crane # 29, Serial # 31117) with damaged and/or malfunctioning components such as but not limited to pendant control push buttons. The hazardous condition was not corrected before operation. Employees were exposed to struck-by hazards while using the crane to hoist steel materials/parts used in the manufacturing/assembly process, weighing approximately 3,743 pounds.
Recent events (2)
- — I (S) $11585
- — Z (S) $16550
1910.303 B01
- Issued
- Jun 24, 2025
- Abate by
- Jul 7, 2025
- Penalty
- Initial $16,550 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Examination. Electric equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees. a. Gradall Industries, Inc located at 406 Mill Avenue SW, New Philadelphia, OH 44663: On or about February 6, 2025, and at times prior, the employer did not examine and identify electrical defects such as but not limited to damaged flexible power cord/strain relief associated with the Yale 3 ton underhung crane (EQ #31407, Crane # 78, Serial # AN192571) with a Walker Electric Magnetic Lifting Device. Employees were exposed to struck-by and electrical shock hazards while using a crane with damaged electrical connections to hoist steel materials/parts used in the manufacturing/assembly process. b. Gradall Industries, Inc located at 406 Mill Avenue SW, New Philadelphia, OH 44663: On or about February 6, 2025, and at times prior, the employer did not examine and identify electrical defects such as but not limited to damaged flexible power cord/strain relief associated with the 2 ton underhung crane (EQ #30670, Crane # 79, Serial # 110897) with a Anver Vacuum and Walker Electric Magnetic Lifting Devices . Employees were exposed to struck-by and electrical shock hazards while using a crane with damaged electrical connections to hoist steel materials/parts used in the manufacturing/assembly process.
Recent events (2)
- — I (S) $0
- — Z (S) $16550
1910.212 A01
- Issued
- Jun 24, 2025
- Abate by
- Jul 7, 2025
- Penalty
- Initial $11,823 · Current $8,276 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc. a. Gradall Industries, Inc located at 406 Mill Avenue SW, New Philadelphia, OH 44663 on or about February 6, 2025, and at times prior, employees were exposed to caught-in hazards associated with unguarded rotating parts on a two unit AB Arboga Maskiner Drill Press.
Recent events (2)
- — I (S) $8276.1
- — Z (S) $11823
More inspections at Gradall Industries, INC.
View Gradall Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333120)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348028192.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.