IDAHO FALLS, ID —
OSHA Inspection: A&R FABRICATION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A&R FABRICATION, INC. in 515 WEST 19TH STREET, IDAHO FALLS, ID 83402 (NAICS 332999). OSHA activity number 348040056.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A&R FABRICATION, INC.
- Site address
- 515 WEST 19TH STREET
- City
- IDAHO FALLS
- State
- ID
- ZIP
- 83402
- Mailing
- 515 WEST 19TH STREET, IDAHO FALLS, ID 83402
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 13
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 14, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $3,215 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Fabrication: On February 11, 2025, and at times prior to; the employer did not develop procedures for the Haas CNC Mill, Model VF-2SS, SN 1099288. Operators assist with and replace internal lights, clean springs, and perform basic maintenance and minor electrical. Note* Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $3215
1910.147 C07 I
- Issued
- May 14, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a) Fabrication and Installation: On February 11, 2025, and at times prior to; the employer failed to provide adequate energy control training to ensure employees understood their responsibilities and the steps required to protect themselves from energized equipment to include but not limited to the Haas CNC Mill, Model VF-2SS, SN 1099288, and during installation services at jobsites. Note* Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- May 14, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) Fabrication: On February 11, 2025, and at times prior to; the employer failed to require the use of lockout devices for the Haas CNC Mill, Model VF-2SS, SN 1099288 during employee activities to include replacement of internal lights, cleaning springs, and performing minor electrical work. Note* Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.32 B04
- Issued
- May 14, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $804 · Current $402 Reduced
General-duty citation text
29 CFR 1904.32(b)(4): The company executive who certified the log was not: an owner of the company, officer of the corporation, highest ranking company official, or the immediate supervisor of the highest ranking company official: a) On February 11, 2025 and at times prior to; OSHA 300As for 2024-2022 were signed by the company's Bookkeeper. Note* Abatement certification is required for this item.
Recent events (2)
- — I (O) $402
- — Z (O) $804
More inspections at A&R Fabrication, INC.
View A&R Fabrication, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348040056.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.