KENNEDALE, TX —
OSHA Inspection: HARRISON JET GUNS II, L.P. / HJG MANUFACTURING
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HARRISON JET GUNS II, L.P. / HJG MANUFACTURING in 6915 HUDSON VILLAGE CREEK ROAD, KENNEDALE, TX 76060 (NAICS 325920). OSHA activity number 348040460.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARRISON JET GUNS II, L.P. / HJG MANUFACTURING
- Site address
- 6915 HUDSON VILLAGE CREEK ROAD
- City
- KENNEDALE
- State
- TX
- ZIP
- 76060
- Mailing
- 6915 HUDSON VILLAGE CREEK ROAD, KENNEDALE, TX 76060
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325920
- Employees
- 63
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.157 G01
- Issued
- Aug 4, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $6,620 · Current $5,296 Reduced
General-duty citation text
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage firefighting: On or about February 6, 2025, and at times prior thereto, in the loading building, employees were required to fight small fires while the employer did not provide an educational program to familiarize employees with the general principles of fire extinguisher use and the associated hazards.
Recent events (2)
- — I (S) $5296
- — Z (S) $6620
1910.157 G03
- Issued
- Aug 4, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(3): Employees who have been designated to use firefighting equipment as part of the emergency action plan were not provided training in the use of the appropriate equipment: On or about February 6, 2025, and at times prior thereto, employees who had been designated to use portable fire extinguishers were not provided the training to do so.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 B04 I
- Issued
- Aug 4, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $11,585 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(b)(4)(i): The pedal mechanism shall be protected to prevent unintended operation from falling or moving objects or by accidental stepping onto the pedal. On or about February 6, 2025, and at times prior thereto, in the loading building, employees operating shape charge machine presses were exposed to inadvertent actuation or unintended energization hazards where adequate foot pedal guarding was not in place over the foot pedal.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1910.217 C02 I A
- Issued
- Aug 4, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $11,585 · Current $9,268 Reduced
General-duty citation text
29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s): On or about February 6, 2025, and at times prior thereto, in the loading building, the employer did not ensure that the point of operation guarding for the shape charge presses prevented employees from accessing the point of operation.
Recent events (2)
- — I (S) $9268
- — Z (S) $11585
1910.217 E01
- Issued
- Aug 4, 2025
- Abate by
- Sep 2, 2025
- Penalty
- Initial $11,585 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(e)(1): The employer did not establish and follow an inspection program having a general component and a directed component: On or about February 6, 2025, and at times prior thereto, in the loading building, the employer did not establish and follow an inspection program for the Shape Charge Manufacturing Presses.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1904.39 A02
- Issued
- Aug 4, 2025
- Penalty
- Initial $8,276 · Current $6,621 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: On or about February 6, 2025, the employer did not report a workplace incident that resulted in the in-patient hospitalization of an employee with the 24-hour reporting time frame upon learning about the hospitalization.
Recent events (2)
- — I (O) $6620.8
- — Z (O) $8276
More inspections in this industry (NAICS 325920)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348040460.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.