MIDDLETOWN, PA —
OSHA Inspection: MG FOODS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MG FOODS in 3201 FULLING MILL RD, MIDDLETOWN, PA 17057 (NAICS 311999). OSHA activity number 348042748.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MG FOODS
- Site address
- 3201 FULLING MILL RD
- City
- MIDDLETOWN
- State
- PA
- ZIP
- 17057
- Mailing
- 3201 FULLING MILL RD, MIDDLETOWN, PA 17057
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311999
- Employees
- 104
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jun 17, 2025
- Abate by
- Dec 1, 2025
- Penalty
- Initial $8,038 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) 3201 Fulling Mill Rd MIDDLETOWN, PA 17057 - Maintenance employees were exposed to uncontrolled hazardous energy sources while conducting preventative maintenance and repair procedures on the food packaging lines due to the employer not establishing machine specific lockout / tagout procedures, on or about February 14, 2025. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $5000
- — Z (S) $8038
1910.147 C06 I
- Issued
- Jun 17, 2025
- Abate by
- Dec 1, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) 3201 Fulling Mill Rd MIDDLETOWN, PA 17057 - Maintenance employees were exposed to uncontrolled energy hazards due to the employer not conducting periodic inspections of the Lockout / Tagout procedures utilized to conducted preventative maintenance and repair procedures on the food packaging lines, on or about February 14, 2025. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I A
- Issued
- Jun 17, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation: (a) 3201 Fulling Mill Rd MIDDLETOWN, PA 17057 - the employer did not provide Authorized level lockout tagout training to the maintenance personnel who conducted preventative maintenance and repair procedures on the food packaging lines containing multiple energy sources, on or about February 14, 2025. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D01
- Issued
- Jun 17, 2025
- Abate by
- Dec 1, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(1):The authorized employee did not have knowledge of the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy before the authorized or affected employee turned off. a) 3201 Fulling Mill Rd MIDDLETOWN, PA 17057 - Line Leads were exposed to uncontrolled hazardous energy sources related to bypassing machine guarding while conducting product line changeover procedures on the food packaging lines, the employees were not trained to the level of an authorized employee, on or about February 14, 2025. b) 3201 Fulling Mill Rd MIDDLETOWN, PA 17057 - Machine Operators were exposed to uncontrolled hazardous energy sources related to bypassing machine guarding while conducting product line changeover procedures on the food packaging lines, the employees were not trained to the level of an authorized employee, on or about February 14, 2025. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at MG Foods
View MG Foods's full OSHA safety record →
More inspections in this industry (NAICS 311999)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348042748.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.