LARKSVILLE, PA —
OSHA Inspection: RALMARK COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of RALMARK COMPANY in 83 EAST LUZERNE AVENUE, LARKSVILLE, PA 18651 (NAICS 336413). OSHA activity number 348043027.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RALMARK COMPANY
- Site address
- 83 EAST LUZERNE AVENUE
- City
- LARKSVILLE
- State
- PA
- ZIP
- 18651
- Mailing
- 83 EAST LUZERNE AVENUE, LARKSVILLE, PA 18651
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336413
- Employees
- 26
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 14, 2025
- Abate by
- May 8, 2025
- Penalty
- Initial $4,965 · Current $3,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) General Machine Shop, AFM Lathe: On or about February 13, 2025, employees operating a lathe were exposed to struck-by hazards due to the lack of any chuck guard present. b) General Machine Shop, Turnmaster 13 Lathe: On or about February 13, 2025, employees operating a lathe were exposed to struck-by hazards due to the lack of any chuck guard present. c) Phenolic Production, Disher: On or about February 13, 2025, employees operating homemade machinery known as a "disher" were exposed to struck-by hazards due to the lack of any guarding present on the exposed horizontal chuck. Abatement certification required.
Recent events (2)
- — I (S) $3250
- — Z (S) $4965
1910.1200 E01
- Issued
- Apr 14, 2025
- Abate by
- May 8, 2025
- Penalty
- Initial $4,965 · Current $3,250 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) Metal Turning: On or about February 13, 2025, employees working on CNC machines using cutting lubricant were exposed to chemical hazards, such as but not limited to, 1-phenoxypropan-2-ol sodium petroleum sulfonate, dicyclohexylamine, and sodium omadine due to a lack of any HazCom Program. Abatement certification required.
Recent events (2)
- — I (S) $3250
- — Z (S) $4965
1910.1200 G08
- Issued
- Apr 14, 2025
- Abate by
- May 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work shift to employees when they were in their work area(s) a) Metal turning: On or about February 13, 2025, employees working on CNC machines using cutting lubricant were exposed to chemical hazards, such as but not limited to, 1-phenoxypropan-2-ol sodium petroleum sulfonate, dicyclohexylamine, and sodium omadine and the safety data sheets were not readily accessible in their work area. Abatement certification required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Apr 14, 2025
- Abate by
- May 8, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Metal turning: On or about February 13, 2025, employees working on CNC machines using cutting lubricant were exposed to chemical hazards, such as but not limited to, 1-phenoxypropan-2-ol sodium petroleum sulfonate, dicyclohexylamine, and sodium omadine and the effective training had not been provided prior to the employees using such chemicals. Abatement certification required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D02
- Issued
- Apr 14, 2025
- Abate by
- May 1, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a) 83 East Luzerne Avenue, Larksville, PA 18651: On or about February 13, 2025, the employer had not verified through a written certification, that the required hazard assessment had been performed. Abatement certification required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Ralmark Company
View Ralmark Company's full OSHA safety record →
More inspections in this industry (NAICS 336413)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348043027.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.