ELMIRA HEIGHTS, NY —
OSHA Inspection: CARBAUGH TOOL COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CARBAUGH TOOL COMPANY, INC. in 126 PHILO ROAD WEST, ELMIRA HEIGHTS, NY 14903 (NAICS 332710). OSHA activity number 348049362.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARBAUGH TOOL COMPANY, INC.
- Site address
- 126 PHILO ROAD WEST
- City
- ELMIRA HEIGHTS
- State
- NY
- ZIP
- 14903
- Mailing
- 126 PHILO ROAD WEST, ELMIRA HEIGHTS, NY 14903
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 15
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.219 D01
- Issued
- Jun 20, 2025
- Penalty
- Initial $3,215 · Current $2,411 Reduced
General-duty citation text
29 CFR 1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) On or about 2/03/2025 at the site located at 126 Philo Road West, Elmira Heights, NY: An employee utilizing the Crystal Lake OD Cylindrical Grinder was exposed to a caught in hazard from an unguarded in-running nip point where the belt and pulley meet.
Recent events (2)
- — I (S) $2411.25
- — Z (S) $3215
1910.219 E03 I
- Issued
- Jun 20, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): a) On or about 2/03/2025 at the site located at 126 Philo Road West, Elmira Heights, NY: An employee utilizing the Crystal Lake OD Cylindrical Grinder was exposed to a caught in hazard from an unguarded in-running nip point where the belt and pulley meet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Jun 20, 2025
- Abate by
- Jul 17, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about 2/19/2025 at the site located at 126 Philo Road West, Elmira Heights, NY: The employer did not perform a periodic inspection of the energy control procedures at least annually to ensure the procedures were being followed for machines including but not limited to the Water Jet System, Milling Machines, Lathes, Electronic Discharge Machine, and the Crystal Likes OD Grinder.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Carbaugh Tool Company, INC.
View Carbaugh Tool Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348049362.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.