BELMONT, NH —
OSHA Inspection: ALL METALS INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ALL METALS INDUSTRIES, INC. in 4 HIGGINS DRIVE, BELMONT, NH 03220 (NAICS 423510). OSHA activity number 348054818.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL METALS INDUSTRIES, INC.
- Site address
- 4 HIGGINS DRIVE
- City
- BELMONT
- State
- NH
- ZIP
- 03220
- Mailing
- 4 HIGGINS DRIVE, BELMONT, NH 03220
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423510
- Employees
- 40
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.215 A02
- Issued
- Mar 13, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $8,276 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): The safety guard did not cover the spindle end, nut, and flange projections. There was no safety guard which was mounted so as to maintain proper alignment with the wheel: Ryobi Bench Grinder (BG612G) - Employees were exposed to unguarded rotating parts such that there was no guard covering the spindle end, nut and flange projections.
Recent events (2)
- — I (S) $3500
- — Z (S) $8276
1910.215 A04
- Issued
- Mar 13, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rests were not adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage: Ryobi Bench Grinder (BG612G) - Employees were exposed to hazards where the bench grinder was not equipped with a work rest.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Mar 13, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): Safety guards of the types described in Subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, were not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel such that the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member exceeded one-fourth inch (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.): Ryobi Bench Grinder (BG612G) - Employees were exposed to struck by hazards where the bench grinder was not equipped with a tongue guard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 D01
- Issued
- Mar 13, 2025
- Abate by
- Mar 19, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(d)(1): Inspection. Immediately before mounting, all wheels were not closely inspected and sounded by the user (ring test) to make sure they had not been damaged in transit, storage, or otherwise. The spindle speed of the machine was not checked before mounting of the wheel to be certain that it did not exceed the maximum operating speed marked on the wheel. Wheels were not tapped gently with a light nonmetallic implement, such as the handle of a screwdriver for light wheels, or a wooden mallet for heavier wheels: Ryobi Bench Grinder (BG612G) - Employees were exposed to struck by hazards where the employer was not ensuring "ring tests" were performed on wheels prior to mounting, installation and use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at ALL Metals Industries, INC.
View ALL Metals Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423510)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348054818.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.