PECOS, TX —
OSHA Inspection: FIRST FLEET SERVICES
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FIRST FLEET SERVICES in 74 FARM TO MARKET 2119, PECOS, TX 79772 (NAICS 811118). OSHA activity number 348054867.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FIRST FLEET SERVICES
- Site address
- 74 FARM TO MARKET 2119
- City
- PECOS
- State
- TX
- ZIP
- 79772
- Mailing
- 8820 MW LOOP 338 BLDG 8, ODESSA, TX 79764
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811118
- Employees
- 7
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.252 A02 IV
- Issued
- Jul 31, 2025
- Abate by
- Sep 15, 2025
- Penalty
- Initial $11,585 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.252(a)(2)(iv): Cutting or welding was permitted in areas before the areas were inspected by the individual responsible for authorizing cutting and welding operations. On or about February 18, 2025, on the northeast side of the jobsite; an employee utilized a welding machine without prior inspection while performing welding activities on the exterior of a tanker.
Recent events (2)
- — I (S) $9000
- — Z (S) $11585
1910.252 A02 VI C
- Issued
- Jul 31, 2025
- Abate by
- Sep 15, 2025
- Penalty
- Initial $11,585 · Current $0 Reduced
General-duty citation text
29 CFR 1910.252(a)(2)(vi)(C): Cutting or welding was permitted in the presence of explosive atmospheres (mixture of flammable gases, vapors, liquids, or dusts with air), or explosive atmospheres that could develop inside uncleaned or improperly prepared tanks or equipment which had previously contained such materials, or that could develop in areas with an accumulation. On or about February 18, 2025, on the northeast side of the jobsite; an employee utilized a welding machine without prior inspection of a possible explosive atmosphere while performing welding activities on the exterior of a tanker.
Recent events (2)
- — I (S) $0
- — Z (S) $11585
1910.252 A03 I
- Issued
- Jul 31, 2025
- Abate by
- Sep 15, 2025
- Penalty
- Initial $11,585 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.252(a)(3)(i): Welding, cutting, or other hot work was performed on used drums, barrels, tanks, or other containers that had not been cleaned so thoroughly as to make absolutely certain there were no flammable materials present or any substance: On or about February 18, 2025, on the northeast side of the jobsite; an employee utilized a welding machine without thoroughly cleaning the tanker to ensure there were no flammable materials present.
Recent events (2)
- — I (S) $9000
- — Z (S) $11585
1910.1200 H01
- Issued
- Jul 31, 2025
- Abate by
- Sep 16, 2025
- Penalty
- Initial $6,620 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: On or about February 18, 2025, on the northeast side of the jobsite; an employee utilized a welding machine without proper training on the hazards associated with welding.
Recent events (2)
- — I (S) $5000
- — Z (S) $6620
1910.134 A02
- Issued
- Jul 31, 2025
- Abate by
- Sep 15, 2025
- Penalty
- Initial $6,620 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.134(a)(2): A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee. On or about February 18, 2025, on the northeast side of the jobsite; an employee utilized a welding machine without the use of a respirator while performing welding activities on the exterior of a tanker.
Recent events (2)
- — I (O) $5000
- — Z (S) $6620
More inspections in this industry (NAICS 811118)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348054867.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.