PEACHTREE CITY, GA —
OSHA Inspection: INTEGRITY FUSION PRODUCTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of INTEGRITY FUSION PRODUCTS, INC. in 270 PARKADE CT, PEACHTREE CITY, GA 30269 (NAICS 326122). OSHA activity number 348063868.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTEGRITY FUSION PRODUCTS, INC.
- Site address
- 270 PARKADE CT
- City
- PEACHTREE CITY
- State
- GA
- ZIP
- 30269
- Mailing
- 270 PARKADE CT, PEACHTREE CITY, GA 30269
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326122
- Employees
- 45
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 P01
- Issued
- May 6, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $8,276 · Current $4,966 Reduced
General-duty citation text
29 CFR 1910.178(p)(1):Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s); (a) Crown Powered Industrial Truck; On or about, February 25, 2025, and times prior, the employer exposed employees to struck-by hazards, in that the employer did not remove from service the "Crown" (Serial # 9A221882 LP type) Powered Industrial Truck (PIT) which was leaking hydraulic fluid around the fittings on the mast while the PIT was used by employees to move product throughout the production and warehouse floor.
Recent events (2)
- — I (S) $4965.6
- — Z (S) $8276
1910.215 A04
- Issued
- May 6, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $6,620 · Current $3,972 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: (a) Production floor; On or about, February 25, 2025, and times prior, the employer exposed employees to caught-in hazards, in that the work rest were not provided on the "JET" 8-inch bench grinder for employees operating the bench grinder.
Recent events (2)
- — I (S) $3972
- — Z (S) $6620
1910.219 D01
- Issued
- May 6, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $8,276 · Current $4,966 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):: (a) Vertical Turn Lathe; On or about, February 25, 2025, and time prior, the employer exposed employees to caught-in hazards, in that machine guarding for the vertical turn lathe mixtruder motor was ineffective where the Pulley were not completely enclosed, exposing employees to caught-in/rotating parts while employees operated the lathe.
Recent events (2)
- — I (S) $4965.6
- — Z (S) $8276
1910.219 E01 I
- Issued
- May 6, 2025
- Abate by
- Jun 4, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i):Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): (a) Vertical Turn Lathe; On or about, February 25, 2025, and time prior, the employer exposed employees to caught-in hazards, in that machine guarding for the vertical turn lathe mixtruder motor was ineffective where the belt were not completely enclosed, exposing employees to caught-in/rotating parts while employees operated the lathe.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Integrity Fusion Products, INC.
View Integrity Fusion Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326122)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348063868.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.