Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: COMPLETE QUALITY SERVICES LLC

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of COMPLETE QUALITY SERVICES LLC in 864 N. 19TH ST., COLORADO SPRINGS, CO 80904 (NAICS 236116). OSHA activity number 348076274.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Complete Quality Services LLC — free Get an email when a new federal OSHA severe-injury report for Complete Quality Services LLC is published. One employer, no account, unsubscribe in one click.
Site address
864 N. 19TH ST.
City
COLORADO SPRINGS
State
CO
ZIP
80904
Mailing
2185 POTEAE CIR, COLORADO SPRINGS, CO 80915
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
236116
Employees
3
Ownership type
A

5 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Jul 7, 2025
Abate by
Aug 25, 2025
Penalty
Initial $398 · Current $398
29 CFR  1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  a)  On or about June 14, 2025, the employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated.
Recent events (1)
  • — Z (O) $398

5(a)(1)

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 29, 2025
Abate by
Jun 4, 2025
Penalty
Initial $4,965 · Current $4,965
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by, fall, crushing and electrocution hazards:  a)  On or about November 3, 2024, the employer did not ensure an employee was protected from struck-by, fall, crushing, and electrocution hazards while operating a Skyjack SJ86 T telescopic aerial lift.  After the platform was raised to approximately 25 feet, the aerial lift tipped over and contacted the nearby energized 12kV conductors.
Recent events (1)
  • — Z (S) $4965

1926.416 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 29, 2025
Abate by
Jun 4, 2025
Penalty
Initial $4,965 · Current $4,965
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to an electric power circuit that the employee could contact in the course of work and was not protected against electric shock by de-energizing the circuit and grounding it or by guarding it effectively by insulation or other means:  a)  On November 3, 2024 the employer did not ensure an employee was protected from electrocution hazards while painting a four-story multi-family residential building while operating a Skyjack SJ86 T telescopic boom, in the vicinity of  energized 12kV conductors. This condition exposed employees to electrocution hazards.
Recent events (1)
  • — Z (S) $4965

1926.416 A03

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 29, 2025
Abate by
Jun 4, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.416(a)(3): The employer began work without determining if employees could contact any part of an energized circuit and did not post warning signs and advise employees of the location of the circuit, hazards, and protective measures they need to take:   a) On November 3, 2024, the employer did not ensure employees were protected from electrical hazards in that, the employer did not determine if employees would come in contact with overhead energized conductors. The employer failed to post warning signs to advise employees of hazardous locations while painting a four-story building while working on a Skyjack SJ86 T telescopic boom, in the vicinity of energized 12kV conductors.
Recent events (1)
  • — Z (S) $0

1926.454 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 29, 2025
Abate by
Jun 4, 2025
Penalty
Initial $4,965 · Current $4,965
29 CFR  1926.454(a)(1): Employer did not ensure that employees while on a scaffold are trained by a qualified person on ways to minimize hazards in the work area:   a)  On or about November 3, 2024, the employer did not ensure an employee operating the Skyjack SJ86 T telescopic boom was provided training by a qualified person. This condition exposed an employee to falls, crushing, stuck-by and electrocution hazards.
Recent events (1)
  • — Z (S) $4965

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348076274.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.