Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: SENTRY INSURANCE

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of SENTRY INSURANCE in 1800 NORTH POINT DRIVE, STEVENS POINT, WI 54481 (NAICS 524126). OSHA activity number 348077785.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Sentry Insurance for free Get an email when a new federal OSHA severe-injury report for Sentry Insurance is published. One employer, no account, unsubscribe in one click.
Establishment
SENTRY INSURANCE
Site address
1800 NORTH POINT DRIVE
City
STEVENS POINT
State
WI
ZIP
54481
Mailing
1800 NORTH POINT DRIVE, STEVENS POINT, WI 54481
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
524126
Employees
1499
Ownership type
Private (A)

4 citations on file for this inspection.

1910.219 D01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 4, 2025
Abate by
May 2, 2025
Penalty
Initial $8,038 · Current $4,823 Reduced
29 CFR 1910.219(d)(1):  Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.  On or about March 4, 2025, at an establishment located at 1800 North Point Drive, in Stevens Point, Wisconsin; the back side of the Bell Howell Mail Processing Machine, Model Ascender 16, Serial Number:  A584850/0485A was an exposed belt and pulley drive used to power the driver rollers to move envelopes exposing employees to caught in between hazards.
Recent events (2)
  • · I (S) $4822.8
  • · Z (S) $8038

1910.219 E03 I

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Apr 4, 2025
Abate by
May 2, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.219(e)(3)(i): Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section.   On or about March 4, 2025, at an establishment located at 1800 North Point Drive, in Stevens Point, Wisconsin; the back side of the Bell Howell Mail Processing Machine, Model Ascender 16, Serial Number:  A584850/0485A was an exposed belt and pulley drive used to power the driver rollers to move envelopes exposing employees to caught in between hazards.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 F06 II

Other-than-serious 1 instance 12 exposed
Issued
Apr 4, 2025
Abate by
May 2, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6)(ii):  Product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals, and which, in conjunction with the other information immediately available to employees under the hazard communication program, will provide employees with the specific information regarding the physical and health hazards of the hazardous chemical.  On or about March 4, 2025, at an establishment located at 1800 North Point Drive, in Stevens Point, Wisconsin; the employer did not ensure that each container of hazardous chemical in the workplace was labeled, tagged, or marked with the products identity or with information on the hazards of the chemical within.  In the Mail to Print Area, a 55-gallon drum used to collect waste ink was not labeled with the identity or the hazards of the chemicals.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.1200 H03 IV

Other-than-serious 1 instance 12 exposed
Issued
Apr 4, 2025
Abate by
May 9, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(iv):  The details of the hazard communication program developed by the employer, including an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employees can obtain and use the appropriate hazard information.  On or about March 4, 2025, at an establishment located at 1800 North Point Drive, in Stevens Point, Wisconsin; in the Print to Mail Area, the employer did not train employees in the steps necessary to be able to readily access the Safety Data Sheets which were located online.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 348077785.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.