CRANDALL, TX —
OSHA Inspection: J.L.Y FRAMING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J.L.Y FRAMING, LLC in 3922 BISON LANE,, CRANDALL, TX 75114 (NAICS 238130). OSHA activity number 348077835.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J.L.Y FRAMING, LLC
- Site address
- 3922 BISON LANE,
- City
- CRANDALL
- State
- TX
- ZIP
- 75114
- Mailing
- 9501 BROCKBANK DR,, DALLAS, TX 75220
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Jul 2, 2025
- Abate by
- Jul 29, 2025
- Penalty
- Initial $4,256 · Current $2,554 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: (a) On or about October 28, 2024, an employee working while standing on the ground under those working above was not protected from receiving a head injury in that he was not wearing a protective helmet.
Recent events (2)
- — I (S) $2553.6
- — Z (S) $4256
1926.304 D
- Issued
- Jul 2, 2025
- Abate by
- Jul 29, 2025
- Penalty
- Initial $4,965 · Current $2,979 Reduced
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: (a) On or about February 28, 2025, an employee working on the Southeast side of the house was not protected from being cut when using a DeWalt cordless circular saw(s) to cut boards for framing, in that the lower guard was held in the up open position by a nail in the form of a clip.
Recent events (2)
- — I (S) $2979
- — Z (S) $4965
1926.501 B13
- Issued
- Jul 2, 2025
- Abate by
- Jul 29, 2025
- Penalty
- Initial $4,965 · Current $2,979 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): (a) On or about February 28, 2025, an employee and the employer were placing bundles of shingles onto the roof ridge of a house being built without being protected from falling.
Recent events (2)
- — I (S) $2979
- — Z (S) $4965
1926.1053 B13
- Issued
- Jul 2, 2025
- Abate by
- Jul 29, 2025
- Penalty
- Initial $3,547 · Current $2,128 Reduced
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: (a) This violation occurred on February 28, 2025; an employee was not protected from falling when he used the top step of a stepladder to access the top of the walls he was working from.
Recent events (2)
- — I (S) $2128.2
- — Z (S) $3547
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348077835.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.