PROVIDENCE, RI —
OSHA Inspection: EC QUALITY CONSTRUCTION, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of EC QUALITY CONSTRUCTION, INC. in 120 BROWN STREET, PROVIDENCE, RI 02906 (NAICS 238160). OSHA activity number 348082082.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EC QUALITY CONSTRUCTION, INC.
- Site address
- 120 BROWN STREET
- City
- PROVIDENCE
- State
- RI
- ZIP
- 02906
- Mailing
- 320 HARTFORD AVE, BELLINGHAM, MA 02019
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Apr 22, 2025
- Abate by
- Jun 6, 2025
- Penalty
- Initial $2,837 · Current $1,986 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment was not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation hazards. a) Worksite: On or about March 5, 2025, employees were exposed to eye injuries while using a pneumatic nail gun to install trim boards around a dormer, without eye protection.
Recent events (2)
- — I (S) $1985.9
- — Z (S) $2837
1926.304 H01
- Issued
- Apr 22, 2025
- Abate by
- Jun 6, 2025
- Penalty
- Initial $3,547 · Current $2,483 Reduced
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut. a) Worksite: On or about March 5, 2025, employees were exposed to laceration and amputation hazards while operating a Dewalt Model DW745 table saw without proper guarding.
Recent events (2)
- — I (S) $2482.9
- — Z (S) $3547
1926.501 B13
- Issued
- Apr 22, 2025
- Abate by
- Jun 6, 2025
- Penalty
- Initial $4,965 · Current $3,476 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employees provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b). a) Worksite: On or about March 5, 2025, employees were exposed to fall hazards while installing wooden trim boards on a residential structure from an approximate height of 25-feet without fall protection.
Recent events (2)
- — I (S) $3475.5
- — Z (S) $4965
1926.1053 B01
- Issued
- Apr 22, 2025
- Abate by
- Jun 6, 2025
- Penalty
- Initial $3,547 · Current $2,483 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed. a) Worksite: On or about March 5, 2025, employees were exposed to fall hazards while using an aluminum extension ladder that did not extend at least 3-feet above the upper landing surface of the roof.
Recent events (2)
- — I (S) $2482.9
- — Z (S) $3547
1926.503 A01
- Issued
- Apr 22, 2025
- Abate by
- Jul 7, 2025
- Penalty
- Initial $398 · Current $279 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards. a) Worksite: On or about March 5, 2025, the employer did not ensure employees received fall protection training, so employees could recognize fall hazards and the procedures to be followed to minimize these hazards.
Recent events (2)
- — I (O) $278.6
- — Z (O) $398
More inspections at EC Quality Construction, INC.
View EC Quality Construction, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348082082.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.