Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FTK CORPORATION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FTK CORPORATION in FAGAITUA HIGH SCHOOL, PAGO PAGO, AS 96799 (NAICS 238110). OSHA activity number 348091646.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch FTK Corporation — free Get an email when a new federal OSHA severe-injury report for FTK Corporation is published. One employer, no account, unsubscribe in one click.
Establishment
FTK CORPORATION
Site address
FAGAITUA HIGH SCHOOL
City
PAGO PAGO
State
AS
ZIP
96799
Mailing
PO BOX 4874, PAGO PAGO, AS 96799
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238110
Employees
6
Ownership type
A

7 citations on file for this inspection.

1926.403 B02

Serious Gravity 1 1 instance 4 exposed
Issued
Apr 28, 2025
Abate by
May 8, 2025
Penalty
Initial $1,915 · Current $1,915
29 CFR  1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification  Second floor: An electrical receptacle box designed to be installed on a wall was installed on the end of an extension cord exposing employees electrical and fire hazards.
Recent events (1)
  • — Z (S) $1915

1926.405 B02

Serious Gravity 1 1 instance 4 exposed
Issued
Apr 28, 2025
Abate by
May 8, 2025
Penalty
Initial $1,915 · Current $1,915
29 CFR  1926.405(b)(2): All pull boxes, junction boxes, and fittings were not provided with covers.  Second floor: Extension cords powering tools were plugged into a receptacle box with a missing cover exposing employees to electrical and fire hazards.
Recent events (1)
  • — Z (S) $1915

1926.451 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 28, 2025
Abate by
May 22, 2025
Penalty
Initial $3,192 · Current $3,192
29 CFR  1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii)  Scaffolding top platform, front left corner: The scaffolding platform employees worked from to install ceiling tiles was not fully planked, exposing employees to fall hazards.
Recent events (1)
  • — Z (S) $3192

1926.451 G04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 28, 2025
Abate by
May 8, 2025
Penalty
Initial $3,192 · Current $3,192
29 CFR  1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms before being released for use by employees other than erection/dismantling crews:  Scaffolding top platform, front left corner: Guardrails were not installed all around the scaffolding platform employees worked from to install ceiling tiles exposing employees to fall hazards.
Recent events (1)
  • — Z (S) $3192

1926.1052 C01 II

Serious Gravity 5 1 instance 6 exposed
Issued
Apr 28, 2025
Abate by
May 22, 2025
Penalty
Initial $2,553 · Current $2,553
29 CFR  1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge:  Stairway east side: No stair rails were installed on either side of the open stairway employees used to access the second floor for work. Employees were exposed to fall hazards.
Recent events (1)
  • — Z (S) $2553

1926.405 G02 III

Other-than-serious 1 instance 4 exposed
Issued
Apr 28, 2025
Abate by
May 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.405(g)(2)(iii): Flexible cords were not used in continuous lengths without splice or tap:  Second floor: A spliced cord connected to the saw used to cut wood for window frames exposed employees to electrical hazard.
Recent events (1)
  • — Z (O) $0

1926.405 G02 IV

Other-than-serious 1 instance 4 exposed
Issued
Apr 28, 2025
Abate by
May 8, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:  Second floor: The outer insulation to the cord used to power the saw was pulled from the plug exposing employees to electrical hazard.
Recent events (1)
  • — Z (O) $0

View FTK Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348091646.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.