Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SKIK MANAGEMENT CO.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SKIK MANAGEMENT CO. in 17059 WINDSOR CT., HOMER GLEN, IL 60491 (NAICS 238350). OSHA activity number 348105206.

Watch Skik Management CO. — free Get an email when a new federal OSHA severe-injury report for Skik Management CO. is published. One employer, no account, unsubscribe in one click.
Establishment
SKIK MANAGEMENT CO.
Site address
17059 WINDSOR CT.
City
HOMER GLEN
State
IL
ZIP
60491
Mailing
10309 OXFORD AVE., CHICAGO RIDGE, IL 60415
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238350
Employees
5
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $398.00 · Current $398.00
29 CFR  1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.   a. On or about July 30, 2025, the employer did not certify to OSHA within 10 days after the abatement date that each of the following cited violations issued had been corrected:  Citation Number                                                Item Number                                    Abatement Date 0100108/04/2025 0100208/04/2025 0100308/04/2025
Recent events (1)
  • — Z (O) $398

1910.178 L01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3547.00 · Current $3547.00
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck safely:  a.  On or about March 13, 2025, at the above address, an employee was required to operate a powered industrial vehicle and had not been provided with training, including but not limited to formal instruction, practical training and an evaluation of the operators performance, thereby exposing employees to struck by and crushing hazards.
Recent events (1)
  • — Z (S) $3547

1926.501 B10

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4965.00 · Current $4965.00
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system.   a. On or about March 13, 2025, at the above addressed jobsite  employees performing commercial roofing operations, eleven (11) feet four (4) inches above the ground, were not protected from falls, thereby exposing the employees to fall hazards.
Recent events (1)
  • — Z (S) $4965

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3547.00 · Current $3547.00
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a.  On or about March 13, 2025, at the above addressed jobsite, employees conducting roofing operations were not provided training on how to minimize fall hazards, thereby exposing the employees to the hazards associated with falls.
Recent events (1)
  • — Z (S) $3547

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348105206.