ARLINGTON HEIGHTS, IL —
OSHA Inspection: A & C SIDING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A & C SIDING INC. in 900 S EVERGREEN AVE, ARLINGTON HEIGHTS, IL 60005 (NAICS 238170). OSHA activity number 348112061.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A & C SIDING INC.
- Site address
- 900 S EVERGREEN AVE
- City
- ARLINGTON HEIGHTS
- State
- IL
- ZIP
- 60005
- Mailing
- 19158 JACQUIE AVE, ROMEOVILLE, IL 60446
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.304 D
- Issued
- Jul 18, 2025
- Abate by
- Aug 13, 2025
- Penalty
- Initial $2,270 · Current $2,202 Reduced
General-duty citation text
29 CFR 1926.304(d): Portable, power driven circular saws were not equipped with guards above and below the baseplate or shoe that automatically and instantly return to covering position when the tool is withdrawn from the work: a) On March 14, 2025, a Makita 5007F portable circular saw being used for siding work had its lower guard tied back and failed to automatically and instantly return to its covering position. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
- — I (S) $2201.85
- — Z (S) $2270
1926.404 B01 I
- Issued
- Jul 18, 2025
- Abate by
- Aug 13, 2025
- Penalty
- Initial $2,838 · Current $1,929 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(i): The employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites: a) On March 14, 2025, employees were provided with electrical tools and equipment connected by cord and plug without the use of an assured equipment grounding conductor program or ground fault circuit interrupters (GFCI's). In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1928.95
- — Z (S) $2838
1926.451 F06
- Issued
- Jul 18, 2025
- Penalty
- Initial $3,972 · Current $2,185 Reduced
General-duty citation text
29 CFR 1926.451(f)(6): Scaffolds were erected, used, dismantled, altered, or moved such that they, or any conductive material handled on them, could have come closer than the minimum distances established for specific voltages as set forth in the table in subparagraph (f)(6): a) On March 14, 2025, employees were exposed to electrical hazards while erecting pump jack scaffolding in close proximity to a 120/240 volt overhead power line. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $2184.6
- — Z (S) $3972
1926.451 G01
- Issued
- Jul 18, 2025
- Penalty
- Initial $3,972 · Current $2,185 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level: a) On March 14, 2025, employees working from pump jack scaffolding were exposed to fall hazards of approximately 13.1 feet. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $2184.6
- — Z (S) $3972
1926.454 A01
- Issued
- Jul 18, 2025
- Abate by
- Aug 22, 2025
- Penalty
- Initial $2,838 · Current $0 Reduced
General-duty citation text
29 CFR 1926.454(a)(1): The employer failed to have each employee who performs work while on a scaffold trained regarding the nature of any electrical hazards, fall hazards and falling object hazards in the work area. a) On or about March 14, 2025, employees were exposed to electrical and fall hazards while erecting and working from a pump jack scaffold. The employer did not provide a training program to recognize the hazards and the procedures associated with scaffolding work in order to minimize those hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $2838
More inspections in this industry (NAICS 238170)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348112061.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.