Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUALITY SWISS SCREW

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of QUALITY SWISS SCREW in 849 FOURTH AVENUE, ELIZABETH, NJ 07202 (NAICS 332721). OSHA activity number 348113374.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quality Swiss Screw — free Get an email when a new federal OSHA severe-injury report for Quality Swiss Screw is published. One employer, no account, unsubscribe in one click.
Establishment
QUALITY SWISS SCREW
Site address
849 FOURTH AVENUE
City
ELIZABETH
State
NJ
ZIP
07202
Mailing
960 MOUNTAIN AVE, MOUNTAINSIDE, NJ 07092
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
332721
Employees
4
Ownership type
A

3 citations on file for this inspection.

1910.37 A03

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 27, 2025
Abate by
Sep 23, 2025
Penalty
Initial $4,256 · Current $2,979 Reduced
29 CFR  1910.37(a)(3):Exit routes were not free and/or unobstructed. No materials or equipment may be placed, either permanently or temporarily, within the exit route. The exit access must not go through a room that can be locked, such as a bathroom, to reach an exit or exit discharge, nor may it lead into a dead-end corridor. Stairs or a ramp were not provided where the exit route was not substantially level.  a.) Quality Swiss Screw/849 Fourth Avenue, Elizabeth, NJ, 07202/machine shop/Exit door/route  1. The exit route for the rear emergency exit door was not kept clear of material or equipment such as machinery & miscellaneous items.    2. The employer failed to provide stairs or a ramp to the rear emergency exit of the building, which was not substantially level, thereby exposing employees to smoke inhalation hazards.   Condition noted on or about 3/11/2025.
Recent events (2)
  • — I (S) $2979.2
  • — Z (S) $4256

1910.212 A03 II

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 27, 2025
Abate by
Sep 23, 2025
Penalty
Initial $4,256 · Current $2,979 Reduced
29 CFR  1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle:  A) Quality Swiss Screw/849 Fourth Avenue, Elizabeth, NJ 07202- Machine Shop/ The employer did not ensure that the Tornos machines in the machine shop were guarded to protect against injuries.  The machines did not have any guarding to prevent employees from accessing the point of operation. This condition exposed employees to amputation hazards.   Condition observed on or about 03/11/2025.
Recent events (2)
  • — I (S) $2979.2
  • — Z (S) $4256

1910.219 E01 I

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 27, 2025
Abate by
Sep 23, 2025
Penalty
Initial $4,256 · Current $2,979 Reduced
29 CFR  1910.219(e)(1)(i):Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o):  (a) Quality Swiss Screw/849 Fourth Avenue, Elizabeth, NJ 07202- Machine Shop/Tornos Machines-The employer did not ensure that each belt on the machine was guarded to protect against injuries. This condition exposed employees to amputation hazards.    Condition noted on or about 03/11/2025.
Recent events (2)
  • — I (S) $2979.2
  • — Z (S) $4256

View Quality Swiss Screw's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348113374.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.