LINCOLN, NE —
OSHA Inspection: CUSTOM MACHINE & DESIGN INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CUSTOM MACHINE & DESIGN INC. in 5020 NORTH 57TH STREET, LINCOLN, NE 68507 (NAICS 332312). OSHA activity number 348123019.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CUSTOM MACHINE & DESIGN INC.
- Site address
- 5020 NORTH 57TH STREET
- City
- LINCOLN
- State
- NE
- ZIP
- 68507
- Mailing
- 5020 NORTH 57TH STREET, LINCOLN, NE 68507
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 25
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Aug 11, 2025
- Abate by
- Sep 26, 2025
- Penalty
- Initial $1,809 · Current $1,085 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each operator was competent to operate a powered industrial truck as demonstrated by the successful completion of the training and evaluation specified by this paragraph (l): The employer is failing to protect employees from struck-by hazards. This was observed on or about March 20, 2025, at 5020 North 57th Street, Lincoln, Nebraska. The employer failed to ensure that employees who were using a Hyster forklift were trained to use the specific forklift at that location.
Recent events (2)
- — I (S) $1085.4
- — Z (S) $1809
1910.212 A01
- Issued
- Aug 11, 2025
- Penalty
- Initial $2,412 · Current $1,447 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Employee(s) were exposed to caught in and struck by hazards from mechanical rotating parts. This was observed on or about March 20, 2025, at 5020 North 57th Street, Lincoln, Nebraska. Employees were exposed to unguarded point of operation, rotating parts, flying chips on the following but not limited to machines: 1) Clausing-Colchester 15 lathe. 2) Clausing-Colchester 17 lathe.
Recent events (2)
- — I (S) $1447.2
- — Z (S) $2412
1904.41 A01 I
- Issued
- Aug 11, 2025
- Penalty
- Initial $512 · Current $307 Reduced
General-duty citation text
29 CFR 1904.41(a)(1)(i): If your establishment had 20-249 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form: Employees are exposed to various injuries. This was observed on or about March 20, 2025, at 5020 North 57th Street, Lincoln, Nebraska. The employer failed to submit the electronic OSHA 300A Summary for 2024 by the required date of March 2, 2025.
Recent events (2)
- — I (O) $307.2
- — Z (O) $512
1910.37 B02
- Issued
- Aug 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": The emergency exit door was not marked as required by this subpart. This was observed on or about March 20, 2025, at 5020 North 57th Street, Lincoln, Nebraska. The door in the Receiving Area that was designated as an emergency exit was not marked by a sign reading "Exit".
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.37 B06
- Issued
- Aug 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(6): An exit sign was not illuminated to a surface value of at least five foot-candles (54 lux) by a reliable light source: Employee(s) were exposed to the hazards of smoke and fire. This was observed on or about March 20, 2025, at 5020 North 57th Street, Lincoln, Nebraska. The employer did not ensure that the "EXIT" sign located in the Receiving Area was illuminated.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.101 B
- Issued
- Aug 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in Sec. 1910.6: The employer is failing to secure compressed gas cylinder(s). This was observed on or about March 20, 2025, at 5020 North 57th Street, Lincoln, Nebraska. The employer is failing to secure the storage of one argon cylinder to prevent it from falling over.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Custom Machine & Design INC.
View Custom Machine & Design INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348123019.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.