BETHANY, CT —
OSHA Inspection: FAIRFIELD COUNTY MILLWORK, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FAIRFIELD COUNTY MILLWORK, INC. in 20 SARGENT DRIVE, BETHANY, CT 06524 (NAICS 321918). OSHA activity number 348123829.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FAIRFIELD COUNTY MILLWORK, INC.
- Site address
- 20 SARGENT DRIVE
- City
- BETHANY
- State
- CT
- ZIP
- 06524
- Mailing
- 20 SARGENT DRIVE, BETHANY, CT 06524
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 25
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 C01
- Issued
- Apr 8, 2025
- Abate by
- May 23, 2025
- Penalty
- Initial $3,215 · Current $2,251 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: Location: 20 Sargent Drive, Bethany, CT 06524 On or about March 20, 2025, and prior to, two Saw Stop table saws were not provided with a blade guard to protect the operator(s) from amputation and laceration hazards.
Recent events (2)
- — I (S) $2250.5
- — Z (S) $3215
1910.213 C02
- Issued
- Apr 8, 2025
- Abate by
- May 23, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: Location: 20 Sargent Drive, Bethany, CT 06524 On or about March 20, 2025, and prior to, two Saw Stop table saws were not provided with a spreader/riveting knife to protect the operator(s) from struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Apr 8, 2025
- Abate by
- May 23, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: Location: 20 Sargent Drive, Bethany, CT 06524 On or about March 20, 2025, and prior to, two Saw Stop table saws were not provided with non-kickback fingers or dogs to protect the operator(s) from struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Apr 8, 2025
- Abate by
- May 23, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: WORKSHOP: On/or about March 20, 2025, and prior to, the employer did not conduct an annual and/or periodic inspection on the energy control procedures for such as, but not limited to Brandt edge bander, Biesse Rover B CNC, Stiles Ironwood up cut saw, and the Kentwood mill.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L04 III
- Issued
- Apr 8, 2025
- Abate by
- May 23, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: WORKSHOP: On/or about March 21, 2025, and prior to, an evaluation of the powered industrial truck operator's performance was not conducted at least once every three years.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 321918)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348123829.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.