BOLTON, CT —
OSHA Inspection: SURFACE SYSTEMS BY AGM, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SURFACE SYSTEMS BY AGM, INC. in 31 PLYMOUTH LANE, BOLTON, CT 06043 (NAICS 238390). OSHA activity number 348160755.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SURFACE SYSTEMS BY AGM, INC.
- Site address
- 31 PLYMOUTH LANE
- City
- BOLTON
- State
- CT
- ZIP
- 06043
- Mailing
- 9 STEEL STREET, NORTH SMITHFIELD, RI 02896
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238390
- Employees
- 28
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- May 14, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $7,035 · Current $4,900 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause hazards associated with projectiles: Jobsite located at 31 Plymouth Lane, Bolton, Connecticut: On, or about, March 20, 2025, a Makita Model 9564CV angle grinder was equipped with a Xpeed masonry cutting blade that was rated less than the maximum speed of the angle grinder.
Recent events (2)
- — I (S) $4900
- — Z (S) $7035
1904.32 A03
- Issued
- May 14, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $1,407 · Current $1,000 Reduced
General-duty citation text
29 CFR 1904.32(a)(3): The employer did not certify an OSHA 300A Form or equivalent: Company: On, or about, April 4, 2025, the employer failed to certify the 2024 Annual Summary of Work-Related Injuries and Illnesses.
Recent events (2)
- — I (O) $1000
- — Z (O) $1407
1904.39 A02
- Issued
- May 14, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $7,035 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: Company: On, or about, April 2, 2025, the employer had not reported, within twenty four hours of the occurrence, a serious injury that occurred on March 20, 2025 that resulted in the hospitalization of an employee.
Recent events (2)
- — I (O) $0
- — Z (O) $7035
1904.41 A01 I
- Issued
- May 14, 2025
- Abate by
- Jul 2, 2025
- Penalty
- Initial $1,407 · Current $0 Reduced
General-duty citation text
29 CFR 1904.41(a)(1)(i): The establishment had 20 or more but fewer than 250 employees at any time during the previous calendar year, and the establishment was classified as an industry listed in Appendix A to subpart E of this part, but did not electronically submit information from OSHA 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. The employer did not submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form: (a) Surface Systems by AGM: On, or about, May 1, 2025, and at time prior thereto, the employer failed to electronically submit information from their OSHA Form 300A Summary of Work-Related Injuries and Illnesses for 2024 or equivalent on or before March 2, 2025. the establishment employed 28 employees and was classified under NAICS 327991 and 238390 during calendar year 2024.
Recent events (2)
- — I (O) $0
- — Z (O) $1407
More inspections in this industry (NAICS 238390)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348160755.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.