INDORE, WV —
OSHA Inspection: GOULD'S ELECTRIC MOTOR REPAIR, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GOULD'S ELECTRIC MOTOR REPAIR, INC. in 10947 CLAY HIGHWAY, INDORE, WV 25111 (NAICS 335312). OSHA activity number 348166687.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GOULD'S ELECTRIC MOTOR REPAIR, INC.
- Site address
- 10947 CLAY HIGHWAY
- City
- INDORE
- State
- WV
- ZIP
- 25111
- Mailing
- PO BOX 100, INDORE, WV 25111
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335312
- Employees
- 18
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L04 III
- Issued
- Apr 25, 2025
- Abate by
- May 29, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: (a) Shop Floor, Upper/Lower Ends, 10947 Clay Hwy, Indore, WV: On or about April 7, 2025 and times prior, employees would operate a forklift to move material without having received refresher training at least once every three years. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement and states that employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
1910.178 L06
- Issued
- Apr 25, 2025
- Abate by
- May 29, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): (a) Shop Floor, 10947 Clay Hwy, Indore, WV: On or about April 7, 2025 and times prior, employees would operate a forklift to move material without having their initial training certified. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
1910.179 J02
- Issued
- Apr 25, 2025
- Abate by
- May 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2): Overhead cranes were not inspected for defects on a daily basis for items including but not limited to; all functional operating mechanisms, air or hydraulic systems, hooks, and/or hoist chains: (a) Shop Floor, Upper End, 10947 Clay Hwy, Indore, WV: On April 8, 2025, employees operated an overhead crane without first performing a daily inspection to check for defects. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement and states that employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
1910.179 J03
- Issued
- Apr 25, 2025
- Abate by
- May 14, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(3): Complete inspections of the cranes were not being performed at periodic intervals between 1-to-12-months. (a) Shop Floor, Upper End, 10947 Clay Hwy, Indore, WV: On April 8, 2025 and times prior, employees operated an overhead crane without first having the cranes receive a complete inspection periodically in 1-to-12-month intervals. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement and states that employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $0
1904.41 A01 I
- Issued
- Apr 25, 2025
- Abate by
- May 14, 2025
- Penalty
- Initial $1,655 · Current $1,655
General-duty citation text
29 CFR 1904.41(a)(1)(i): The employer did not electronically submit information from the OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. (a) 10947 Clay Highway, Indore, WV: On or about April 8, 2025, the employer failed to submit their Calendar Year 2024 OSHA Form 300A information prior to the March 2, 2025 deadline. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement and states that employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (O) $1655
More inspections at Gould'S Electric Motor Repair, INC.
View Gould'S Electric Motor Repair, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 335312)
More inspections in WV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348166687.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.