Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HARD ROCK STONE & TILE, LLC

Follow-up inspection · Health discipline

On , OSHA opened a follow-up health inspection of HARD ROCK STONE & TILE, LLC in 8255 WARDS LANE, SEMMES, AL 36575 (NAICS 327991). OSHA activity number 348178294.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hard Rock Stone & Tile, LLC — free Get an email when a new federal OSHA severe-injury report for Hard Rock Stone & Tile, LLC is published. One employer, no account, unsubscribe in one click.
Site address
8255 WARDS LANE
City
SEMMES
State
AL
ZIP
36575
Mailing
8255 WARDS LANE, SEMMES, AL 36575
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
327991
Employees
30
Ownership type
A

5 citations on file for this inspection.

1910.147 C01

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Sep 16, 2025
Abate by
Oct 15, 2025
Penalty
Initial $7,035 · Current $7,035
29 CFR  1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    a) On or about April 16, 2025, employees were changing out the blade in the CNC saw area while only relying on control curcuitry as a method of energy control.
Recent events (2)
  • — I (O) $7035
  • — Z (S) $7035

1910.147 C07 I

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Sep 16, 2025
Abate by
Oct 15, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(7)(i):The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees:  a)	On or about April 14, 2025, in the CNC saw area employees were not provided training in lockout/tagout for the CNC saw while performing task such as but not limited to changing blades on the saws.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.37 B02

Other-than-serious 1 instance 4 exposed
Issued
Sep 16, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":  a) Production building: on or about April 14, 2025, the middle bay exit door was not marked as an exit where employees worked cutting and polishing countertops .
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.305 G01 IV A

Other-than-serious 1 instance 4 exposed
Issued
Sep 16, 2025
Abate by
Oct 15, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  a)Production Area: on or about April 14, 2025: flexible extension cords were used to power the overhead permanent lighting for employees cutting and polishing countertops.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 F10

Other-than-serious 1 instance 4 exposed
Issued
Sep 16, 2025
Abate by
Oct 15, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(f)(10): The employer did not ensure that workplace labels or other forms of warnings were prominently displayed on the container or readily available in the work area throughout each work shift.  a) Production area: on or about April 14, 2025, employee(s) utilized secondary containers for chemicals that did not  bottles containing denatured alcohol and cleaners that did not have labels while manufacturing countertops.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Hard Rock Stone & Tile, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348178294.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.