NEW CENTURY, KS —
OSHA Inspection: UNITED MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of UNITED MANUFACTURING, INC. in 301 OVERLAND PARK PLACE, NEW CENTURY, KS 66031 (NAICS 321920). OSHA activity number 348200049.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- UNITED MANUFACTURING, INC.
- Site address
- 301 OVERLAND PARK PLACE
- City
- NEW CENTURY
- State
- KS
- ZIP
- 66031
- Mailing
- 301 OVERLAND PARK PLACE, NEW CENTURY, KS 66031
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 24
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.213 A09
- Issued
- Jun 10, 2025
- Penalty
- Initial $4,824 · Current $2,894 Reduced
General-duty citation text
29 CFR 1910.213(a)(9): All belts, pulleys, gears, shafts, and moving parts were not guarded in accordance with the specific requirements of 1910.219: Employee(s) engaged in operating the Rip saw in Building 5-1/2 located at 301 Overland Park Place, New Century, Kansas were exposed to struck-by hazards due to no machine guarding for the rotating lower feed track under the cutting table, southside machine rotating belt, coupler, and pulleys.
Recent events (2)
- — I (S) $2894.4
- — Z (S) $4824
1910.213 C01
- Issued
- Jun 10, 2025
- Penalty
- Initial $4,824 · Current $2,894 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular hand-fed ripsaw(s) were not guarded by an automatically adjusting hood, which completely enclosed that portion of the saw above the table and above the material being cut: (a) Employee(s) engaged in cutting lumber in Building 5 located at 301 Overland Park Place, New Century, Kansas were exposed to struck-by hazards due to the left side guard being suspended above the table for the NorthTech Industrial Machinery saw, thus no adjustable guard enclosing the rotating saw blade above the table. (b) Employee(s) engaged in cutting lumber in Building 5-1/2 located at 301 Overland Park Place, New Century, Kansas on the Delta Unisaw 10 inch tilting arbor saw were exposed to struck-by hazards due to no adjustable hood enclosing the rotating saw blade above the table.
Recent events (2)
- — I (S) $2894.4
- — Z (S) $4824
1910.215 A04
- Issued
- Jun 10, 2025
- Penalty
- Initial $3,215 · Current $1,929 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Employees operating the Delta bench grinder at the south end of building 5 located at 301 Overland Park Place, New Century, Kansas to sharpen tools were exposed to struck-by hazards due to no work rest being provided for the right side abrasive wheel.
Recent events (2)
- — I (S) $1929
- — Z (S) $3215
1910.215 B09
- Issued
- Jun 10, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: (a) Employees operating the Delta bench grinder at the south end of building 5 located at 301 Overland Park Place, New Century, Kansas to sharpen tools were exposed to struck-by hazards due to no tongue guard being provided for the right side abrasive wheel. (b) Employees operating the Sun Electric bench grinder in the shop room of building 5 located at 301 Overland Park Place, New Century, Kansas were exposed to struck-by hazards due to no tongue guard being provided for the left side abrasive wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 G02 I
- Issued
- Jun 10, 2025
- Penalty
- Initial $4,020 · Current $2,412 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: Employee(s) engaged in operating the Delta 10 inch tilting arbor saw in building 5-1/2 located at 301 Overland Park Place, New Century, Kansas were exposed to electric shock hazards due to energized 480 volt conductors not being secured inside the flexible metal raceway to prevent accidental contact.
Recent events (2)
- — I (S) $2412
- — Z (S) $4020
1910.305 A01 I
- Issued
- Jun 10, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(a)(1)(i): Metal raceways, cable armor, and other metal enclosures for conductors were not connected to all boxes, fittings, and cabinets to provide effective electrical continuity: Employee(s) engaged in operating the Delta 10 inch tilting arbor saw in building 5-1/2 located at 301 Overland Park Place, New Century, Kansas were exposed to electric shock hazards due to the machinery's metal raceway for the energized 480 volt conductors not being connected to a junction box, thus not providing effective continuity.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 P01
- Issued
- Jun 10, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): Employee(s) were operating a Nissan #12485 powered industrial truck without a functioning horn located at 301 Overland Park Place, New Century, Kansas.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at United Manufacturing, INC.
View United Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348200049.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.