IRVINGTON, AL —
OSHA Inspection: ENDURANCE EQUIPMENT, L.L.C.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of ENDURANCE EQUIPMENT, L.L.C. in 7501 HALF MILE ROAD, IRVINGTON, AL 36544 (NAICS 333243). OSHA activity number 348203522.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ENDURANCE EQUIPMENT, L.L.C.
- Site address
- 7501 HALF MILE ROAD
- City
- IRVINGTON
- State
- AL
- ZIP
- 36544
- Mailing
- 7555 HALF MILE ROAD, IRVINGTON, AL 36544
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333243
- Employees
- 95
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.95 C01
- Issued
- Aug 19, 2025
- Abate by
- Sep 17, 2025
- Penalty
- Initial $4,220 · Current $2,532 Reduced
8111
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent: a) Fabrication Area; On or about April 24, 2025: An employee welding, and grinding steel was exposed to continuous noise at a level of 76.9% dose (equivalent to a TWA of 88.1 dBa) which is approximately 1.538 times the action level for a 8-hour workday of 50% dose (equivalent to a TWA of 85 dBa) and the employer did not administer a continuing, effective hearing conservation program. Sample taken over 536 minutes.
Recent events (2)
- — I (O) $2532
- — Z (S) $4220
1910.95 D01
- Issued
- Aug 19, 2025
- Abate by
- Sep 17, 2025
- Penalty
- Initial $0 · Current $0
8111
General-duty citation text
29 CFR 1910.95(d)(1): When information indicated that any employee's exposure equaled or exceed the 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: a) Fabrication Area; On or about April 24, 2025: An employee welding, and grinding steel was exposed to continuous noise at a level of 76.9% dose (equivalent to a TWA of 88.1 dBa) which is approximately 1.538 times the action level for a 8-hour workday of 50% dose (equivalent to a TWA of 85 dBa) and the employer had not developed a monitoring program to ensure employees were adequately protected from noise. Sample taken over 536 minutes.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.95 G01
- Issued
- Aug 19, 2025
- Abate by
- Sep 17, 2025
- Penalty
- Initial $0 · Current $0
8111
General-duty citation text
29 CFR 1910.95(g)(1): The employer did not establish and maintain an audiometric testing program as provided by 29 CFR 1910.95(g) by making audiometric testing available to all employees whose exposures equal or exceed an 8-hour time-weighted average of 85 decibels: a) Fabrication Area; On or about April 24, 2025: An employee welding, and grinding steel was exposed to continuous noise at a level of 76.9% dose (equivalent to a TWA of 88.1 dBa) which is approximately 1.538 times the action level for a 8-hour workday of 50% dose (equivalent to a TWA of 85 dBa) and the employerdid not establish an audiometric testing program to evaluate the employees hearing. Sample taken over 536 minutes.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.95 K01
- Issued
- Aug 19, 2025
- Abate by
- Sep 17, 2025
- Penalty
- Initial $0 · Current $0
8111
General-duty citation text
29 CFR 1910.95(k)(1): The employer did not train each employee who is exposed to noise at or above an 8-hour time-weighted average of 85 decibels in accordance with the requirements of 29 CFR 1910.95(k): a) Fabrication Area; On or about April 24, 2025: An employee welding, and grinding steel was exposed to continuous noise at a level of 76.9% dose (equivalent to a TWA of 88.1 dBa) which is approximately 1.538 times the action level for a 8-hour workday of 50% dose (equivalent to a TWA of 85 dBa) and the employer did not train employees upon initial assignment and annually thereafter. Sample taken over 536 minutes.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.252 B02 III
- Issued
- Aug 19, 2025
- Abate by
- Sep 17, 2025
- Penalty
- Initial $4,220 · Current $2,532 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii):Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: a) Fabrication Area; On or about April 24, 2025, employees were allowed to walk and work around welding activities and were not protected by noncombustible or flameproof screens or shields.
Recent events (2)
- — I (O) $2532
- — Z (S) $4220
More inspections at Endurance Equipment, L.L.C.
View Endurance Equipment, L.L.C.'s full OSHA safety record →
More inspections in this industry (NAICS 333243)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348203522.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.