Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MILLER BROTHERS BUILDERS LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MILLER BROTHERS BUILDERS LLC in 2176 19-7/16 AVE., RICE LAKE, WI 54868 (NAICS 238130). OSHA activity number 348216193.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Miller Brothers Builders LLC — free Get an email when a new federal OSHA severe-injury report for Miller Brothers Builders LLC is published. One employer, no account, unsubscribe in one click.
Site address
2176 19-7/16 AVE.
City
RICE LAKE
State
WI
ZIP
54868
Mailing
7756 300TH AVENUE, NEW AUBURN, WI 54757
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 3 exposed
Issued
May 2, 2025
Abate by
Jun 2, 2025
Penalty
Initial $2,128 · Current $2,128
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:   (a) Under-construction ladder-frame pole building; On or about April 30, 2025, and dates prior, employees were not wearing impact-rated eye protection while operating electric framing nail guns to install framing members using 3-inch collated framing nails.
Recent events (1)
  • — Z (S) $2128

1926.501 B13

Serious Gravity 5 1 instance 4 exposed
Issued
May 2, 2025
Abate by
Jun 2, 2025
Penalty
Initial $3,547 · Current $3,547
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   (a) Under-construction ladder-frame pole building; On or about April 30, 2025, a means of fall protection was not used during framing activities for employees who worked from wall top plates, roof trusses, and purlins at approximate heights ranging from 14 feet, 2 inches to 20 feet, 8 inches above ground level.
Recent events (1)
  • — Z (S) $3547

1926.503 B01

Serious Gravity 5 1 instance 3 exposed
Issued
May 2, 2025
Abate by
Jun 2, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:  (a) Under-construction ladder-frame pole building; On or about April 30, 2025, and dates prior; the employer did not certify that employees who worked at heights in excess of 6-feet above ground-level to install framing members were trained on identifying and mitigating fall hazards associated with construction work.
Recent events (1)
  • — Z (S) $0

1926.1051 A

Serious Gravity 5 1 instance 4 exposed
Issued
May 2, 2025
Abate by
Jun 2, 2025
Penalty
Initial $2,837 · Current $2,837
29 CFR 1926.1051(a): Stairway(s) or ladder(s) were not provided at all personnel points of access where there was a break in elevation of 19 inches (48 cm) or more, or no ramp, runway, sloped embankment, or personnel hoist was provided:  (a) Under-construction ladder-frame pole building; On or about April 30, 2025, employees were not provided with a safe means to access the top of roof trusses where purlins were being installed, requiring the employees to climb up/down using the wall girts, horizontally spaced approximately 24-inches on-center.
Recent events (1)
  • — Z (S) $2837

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348216193.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.