PLANO, TX —
OSHA Inspection: O'NEIL DIGITAL SOLUTIONS INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of O'NEIL DIGITAL SOLUTIONS INC. in 3100 E. PLANO PARKWAY, PLANO, TX 75074 (NAICS 323111). OSHA activity number 348220096.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- O'NEIL DIGITAL SOLUTIONS INC.
- Site address
- 3100 E. PLANO PARKWAY
- City
- PLANO
- State
- TX
- ZIP
- 75074
- Mailing
- 3100 E. PLANO PARKWAY, PLANO, TX 75074
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 247
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C06 I
- Issued
- Sep 30, 2025
- Abate by
- Oct 27, 2025
- Penalty
- Initial $16,550 · Current $7,613 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: a) On or about May 2, 2025, and at times prior thereto, in the production area, energy control procedures were not inspected periodically for CMC 9000-1. b) On or about May 2, 2025, and at times prior thereto, in the production area, energy control procedures were not inspected periodically for CMC 9000-2.
Recent events (2)
- — I (S) $7613
- — Z (S) $16550
1910.147 C07 I A
- Issued
- Sep 30, 2025
- Abate by
- Oct 27, 2025
- Penalty
- Initial $16,550 · Current $7,613 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. a) On or about May,2 2025, and at times prior thereto, in the production area, authorized employees did not receive authorized employee training on how to perform lock out tag out on CMC 9000-1. b) On or about May,2 2025, and at times prior thereto, in the production area, authorized employees did not receive authorized employee training on how to perform lock out tag out on CMC 9000-2.
Recent events (2)
- — I (S) $7613
- — Z (S) $16550
1910.147 D04 I
- Issued
- Sep 30, 2025
- Abate by
- Oct 27, 2025
- Penalty
- Initial $16,550 · Current $7,613 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i):Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) On or about May 2, 2025, and at times prior thereto, on the CMC 9000-1, employees were conducting maintenance procedures without applying locks and/or tags to isolate the energy sources. b) On or about May 2, 2025, and at times prior thereto, on the CMC 9000-2, employees were conducting maintenance procedures without applying locks and/or tags to isolate the energy sources.
Recent events (2)
- — I (S) $7613
- — Z (S) $16550
1910.212 A01
- Issued
- Sep 30, 2025
- Abate by
- Oct 27, 2025
- Penalty
- Initial $39,720 · Current $39,720
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about May 2, 2025, and at times prior to, employees were exposed to amputation hazards while operating the CMC 400 Evo-1 machine serial number 4493. b. On or about May 2, 2025, and at times prior to, employees were exposed to amputation hazards while operating the CMC 400 Evo-2 machine serial number 4607 The O'Neil Digital Solutions Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(1), which was contained in OSHA inspection number 1715087, citation number 1, item number 2 and was affirmed as a final order on 05-01-2024, with respect to a workplace located at 3100 East Plano Parkway PLANO, TX 75074 .
Recent events (2)
- — I (R) $39720
- — Z (R) $39720
More inspections in this industry (NAICS 323111)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348220096.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.