BUFFALO, NY —
OSHA Inspection: LINEAGE LOGISTICS
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of LINEAGE LOGISTICS in 100 ALLIED DRIVE, BUFFALO, NY 14227 (NAICS 493120). OSHA activity number 348223181.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LINEAGE LOGISTICS
- Site address
- 100 ALLIED DRIVE
- City
- BUFFALO
- State
- NY
- ZIP
- 14227
- Mailing
- 100 ALLIED DRIVE, BUFFALO, NY 14227
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 493120
- Employees
- 48
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 29, 2025
- Abate by
- Oct 30, 2025
- Penalty
- Initial $11,823 · Current $0 Reduced
0170
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Refrigeration warehouse - 100 Allied Drive, Buffalo, NY - On or about 04/14/2025 - procedures were not utilized for the control of potentially hazardous energy when employees replaced the check valve and solenoid valve on AHU-10 anhydrous ammonia refrigeration piping when locks and/or tags were not applied to shut off valves to isolate ammonia. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $11823
1910.147 C05 III
- Issued
- Sep 29, 2025
- Abate by
- Oct 30, 2025
- Penalty
- Initial $0 · Current $0
0170
General-duty citation text
29 CFR 1910.147(c)(5)(iii):Tagout devices utilized did not warn against hazardous conditions if the machine or equipment was energized: a) Refrigeration warehouse - 100 Allied Drive, Buffalo, NY - On or about 04/14/2025 - tagout devices utilized to indicate valve opening and closure of valves on the ammonia refrigeration system piping for AHU-10 did not warn against hazardous conditions if the equipment was energized. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Sep 29, 2025
- Abate by
- Oct 30, 2025
- Penalty
- Initial $0 · Current $0
0170
General-duty citation text
29 CFR 1910.147(d)(4)(i):Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) Refrigeration warehouse - 100 Allied Drive, Buffalo, NY - On or about 04/14/2025 - lockout or tagout devices were not affixed to each of the valves used to isolate anhydrous ammonia on the ammonia refrigeration system piping for the replacement of the check valve and solenoid valve for AHU-10. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Sep 29, 2025
- Abate by
- Oct 30, 2025
- Penalty
- Initial $11,823 · Current $7,500 Reduced
0170
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Refrigeration warehouse - 100 Allied Drive, Buffalo, NY - On or about 04/14/2025 - the employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed for instances including the replacement of the check valve and solenoid valve on AHU-10 piping. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $7500
- — Z (S) $11823
1910.147 E01
- Issued
- Sep 29, 2025
- Abate by
- Oct 30, 2025
- Penalty
- Initial $11,823 · Current $7,500 Reduced
0170
General-duty citation text
29 CFR 1910.147(e)(1): Before lockout tagout devices were removed, the work area was not inspected to ensure that nonessential items had been removed or ensured that machine or equipment components were operationally intact. a) Refrigeration warehouse - 100 Allied Drive, Buffalo, NY - On or about 04/14/2025 - before lockout tagout devices were removed, the work area was not inspected to ensure that equipment components were operationally intact, including the use of soapy water, Litmus Paper, or sulfur stick to verify the absence of ammonia vapor, following the replacement of the check valve and solenoid valve on AHU-10 piping, resulting in an anhydrous ammonia release. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $7500
- — Z (S) $11823
1910.147 E02 II
- Issued
- Sep 29, 2025
- Abate by
- Oct 30, 2025
- Penalty
- Initial $11,823 · Current $7,500 Reduced
General-duty citation text
29 CFR 1910.147(e)(2)(ii): After lockout or tagout devices were removed and before machines or equipment is started, affected employees were not notified that the lockout or tagout device(s) have been removed: a) Refrigeration warehouse - 100 Allied Drive, Buffalo, NY - On or about 04/14/2025 - after lockout or tagout devices were removed and before machines or equipment was started following the replacement of the check valve and solenoid valve on AHU-10 piping, affected employees were not notified that the lockout or tagout device(s) had been removed. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $7500
- — Z (S) $11823
1910.147 F02 I
- Issued
- Sep 29, 2025
- Abate by
- Oct 30, 2025
- Penalty
- Initial $11,823 · Current $7,500 Reduced
0170
General-duty citation text
29 CFR 1910.147(f)(2)(i): When outside servicing personnel were engaged in activities in a facility, the onsite employer and the outside employer did not inform each other of their respective lockout or tagout procedures: a) Refrigeration warehouse - 100 Allied Drive, Buffalo, NY - On or about 04/14/2025 - when outside servicing personnel were engaged in activities in the facility, including the replacement of the check valve and solenoid valve on AHU-10 piping, the onsite employer and the outside employer did not inform each other of their respective lockout or tagout procedures. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $7500
- — Z (S) $11823
More inspections at Lineage Logistics
View Lineage Logistics's full OSHA safety record →
More inspections in this industry (NAICS 493120)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348223181.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.