POMONA, MO —
OSHA Inspection: 4730 LUMBER LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of 4730 LUMBER LLC in 7054 COUNTY RD 4730, POMONA, MO 65789 (NAICS 321920). OSHA activity number 348231614.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- 4730 LUMBER LLC
- Site address
- 7054 COUNTY RD 4730
- City
- POMONA
- State
- MO
- ZIP
- 65789
- Mailing
- P.O. BOX 1041, WEST PLAINS, MO 65775
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 19
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.22 A02
- Issued
- Sep 26, 2025
- Abate by
- Dec 19, 2025
- Penalty
- Initial $4,965 · Current $2,483 Reduced
9210
General-duty citation text
29 CFR 1910.22(a)(2):29 CFR 1910.22(a)(2): The employer did not ensure that the floor of each workroom is maintained in a clean and, to the extent feasible, in a dry condition. The employer did not ensure that when wet processes are used, drainage is be maintained and, to the extent feasible, dry standing places, such as false floors, platforms, and mats are provided. At the worksite located at 7054 County Road 4730 Pomona MO: Employees were exposed to fire and explosion hazards. The floor and areas around equipment were not maintained in a clean condition. Wood dust was observed on the floor up to 8 inches, on top of machinery up to 2 inches, and piping and other elevated surfaces up to 1.5 inches.
Recent events (2)
- — I (S) $2482.5
- — Z (S) $4965
1910.265 C20 II
- Issued
- Sep 26, 2025
- Abate by
- Dec 19, 2025
- Penalty
- Initial $4,965 · Current $2,483 Reduced
9210
General-duty citation text
29 CFR 1910.265(c)(20)(ii): Machine(s) that created dust, shavings, chips, or slivers during a period of time equal to or greater than one-fourth of the working day were not equipped with collecting system(s) of sufficient strength and capacity to enable it to remove such refuse from points of operation and immediate vicinities of machines and work areas: At the worksite located at 7054 County Road 4730 Pomona MO: Employees were exposed to fire and explosion hazards. The dust collection system for the three head and four head resaw machines were not equipped with a dust collection system of sufficient strength, leading to piles of wood dust in, on, and around the areas of the machines. Wood dust was observed on the floor up to 8 inches, on top of machinery up to 2 inches, and piping and other elevated surfaces up to 1.5 inches.
Recent events (2)
- — I (S) $2482.5
- — Z (S) $4965
1910.265 C04 IV
- Issued
- Sep 26, 2025
- Penalty
- Initial $4,965 · Current $2,483 Reduced
General-duty citation text
29 CFR 1910.265(c)(4)(iv): Elevated platform(s), 4 feet or more from the floor level, were not provided with a standard railing: At the worksite located at 7054 County Road 4730 Pomona, MO: Employees were exposed to fall hazards. On or around May 7th, 2025, employees were exposed to fall hazards over four feet when working next to the end trim machine.
Recent events (2)
- — I (O) $2482.5
- — Z (S) $4965
1910.212 A01
- Issued
- Sep 26, 2025
- Abate by
- Dec 19, 2025
- Penalty
- Initial $4,965 · Current $2,483 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At the worksite located at 7054 County Road 4730 Pomona MO: Employees were exposed to caught in hazards. One or more methods of machine guarding was not provided on multiple pieces of equipment. a) End trim conveyor- There were exposed nip points on the end trim conveyor next to where the flipper works and transitions logs. b) Resaw chain conveyor- There is an exposed rotating chain belt around knee height below the resaw chain conveyor that is directly next to two employees. c) End trim saw- On the side of the end trim saw closest to the stacking machines, the saw head is exposed with 14 inches of distance from the end of the machine. d) Lumber stacker- The lumber stackers have a partially guarded chain belt. e) Stacking machine power panels- There is a chain belt attached to the lower right side of the power panels of the stacker machines that is unguarded.
Recent events (2)
- — I (S) $2482.5
- — Z (S) $4965
More inspections in this industry (NAICS 321920)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348231614.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.