OLDSMAR, FL —
OSHA Inspection: MARINE MAT, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MARINE MAT, INC. in 151 VOLLMER AVENUE, OLDSMAR, FL 34677 (NAICS 336612). OSHA activity number 348234592.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARINE MAT, INC.
- Site address
- 151 VOLLMER AVENUE
- City
- OLDSMAR
- State
- FL
- ZIP
- 34677
- Mailing
- 1401 N. MYRTLE AVE, CLEARWATER, FL 33755
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336612
- Employees
- 90
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.37 A03
- Issued
- Jul 23, 2025
- Abate by
- Aug 18, 2025
- Penalty
- Initial $4,965 · Current $2,979 Reduced
General-duty citation text
29 CFR 1910.37(a)(3):Exit route(s) were not kept free and unobstructed: (a) At 151 Vollmer Avenue, Oldsmar, Florida, 34677, in the CNC Shop, on or about 5/8/2025, the employer exposed employees to fire hazards, in that the exit door was blocked by boxes of tape, preventing unobstructed egress, in the event of an emergency.
Recent events (2)
- — I (O) $2979
- — Z (S) $4965
1910.132 D01
- Issued
- Jul 23, 2025
- Abate by
- Aug 18, 2025
- Penalty
- Initial $11,585 · Current $6,951 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): (a) In the CNC Shop at the site, located at 151 Vollmer Avenue, Oldsmar, FL 34677, on or about 4/29/2025, the employer exposed employees to caught-in hazards, in that the employer did not perform an assessment of the hazards and potential hazards that were present on the CNC Gantry Routers prior to providing hand protection to operators.
Recent events (2)
- — I (S) $6951
- — Z (S) $11585
1910.147 C04 I
- Issued
- Jul 23, 2025
- Abate by
- Aug 18, 2025
- Penalty
- Initial $11,585 · Current $6,951 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) In the CNC Shop at the site, located at 151 Vollmer Avenue, Oldsmar, FL 34677, on or about 5/8/2025, the employer exposed employees to struck by and electrical hazards, in that the employer did not document lock out tag out procedures for the CNC Gantry Routers.
Recent events (2)
- — I (S) $6951
- — Z (S) $11585
1910.212 A03 II
- Issued
- Jul 23, 2025
- Abate by
- Aug 18, 2025
- Penalty
- Initial $11,585 · Current $6,951 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) In the CNC Shop at the site, located at 151 Vollmer Avenue, Oldsmar, FL 34677, on or about 4/29/2025, the employer exposed employees to struck by hazards, in that the point of operation for the CNC Gantry Routers was not guarded to prevent operators from having any part of their body come into contact with the rotating cutter head during the operating cycle.
Recent events (2)
- — I (S) $6951
- — Z (S) $11585
1910.242 B
- Issued
- Jul 23, 2025
- Penalty
- Initial $9,931 · Current $5,959 Reduced
General-duty citation text
29 CFR 1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a) In the CNC Shop at the site, located at 151 Vollmer Avenue, Oldsmar, FL 34677, on or about 5/8/2025, the employer exposed employees to compressed air hazards, in that air at approximately 125 p.s.i. was used for cleaning dust off of mats on CNC Gantry Routers.
Recent events (2)
- — I (O) $5958.6
- — Z (S) $9931
More inspections at Marine MAT, INC.
View Marine MAT, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336612)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348234592.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.