Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BUNTIN CONSTRUCTION, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BUNTIN CONSTRUCTION, LLC in 1277 AUTUMN FIELD LANE, DE PERE, WI 54115 (NAICS 238130). OSHA activity number 348234667.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Buntin Construction, LLC — free Get an email when a new federal OSHA severe-injury report for Buntin Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1277 AUTUMN FIELD LANE
City
DE PERE
State
WI
ZIP
54115
Mailing
3282 RYAN ROAD, DE PERE, WI 54115
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.501 B13

Repeat Gravity 10 2 instances 2 exposed
Issued
May 23, 2025
Abate by
Jun 24, 2025
Penalty
Initial $9,930 · Current $6,000 Reduced
29 CFR  1926.501(b)(13):  Residential construction.  Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure.  a)  On or about May 8, 2025, at a worksite located at 1277 Autumn Field Lane, De Pere, Wisconsin, an employee was exposed to a fall hazard of 16 feet while working from an exterior wall top plate framing without using fall protection equipment.  b) On or about May 8, 2025, at a worksite located at 1277 Autumn Field Lane, De Pere, Wisconsin, an employee was exposed to a fall hazard of 11.5 feet while working from an exterior wall top plate framing without using fall protection equipment.  The Buntin Construction LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(13), which was contained in OSHA inspection number 1769592, citation number 1, item number 1a and was affirmed as a final order on October 9, 2024, with respect to a workplace located at 1273 Autumn Field Drive, De Pere, WI  54115.
Recent events (2)
  • — I (R) $6000
  • — Z (R) $9930

1926.503 A01

Repeat Gravity 5 1 instance 2 exposed
Issued
May 23, 2025
Abate by
Jul 1, 2025
Penalty
Initial $7,094 · Current $0 Reduced
29 CFR  1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.  On or about May 8, 2025, at a worksite located at 1277 Autumn Field Lane, De Pere, Wisconsin, the employer did not ensure that employees exposed to fall hazards of 16 feet and 11.5 feet during framing work had received training in the recognition of fall hazards and methods to mitigate those hazards prior to exposure.  The Buntin Construction LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.503(b)(1), which was contained in OSHA inspection number 1769592, citation number 1, item number 1b and was affirmed as a final order on October 9, 2024, with respect to a workplace located at 1273 Autumn Field Drive, De Pere, WI  54115.
Recent events (2)
  • — I (R) $0
  • — Z (R) $7094

1926.602 D

Other-than-serious 1 instance 1 exposed
Issued
May 23, 2025
Abate by
Jul 1, 2025
Penalty
Initial $0 · Current $0
29 CFR  1926.602(d):  Powered industrial truck operator training.  Note: The requirements applicable to construction work under this paragraph are identical to those set forth at ��1910.178(l) of this chapter.  Reference:  29 CFR 1910.178(l)(4)(iii):  An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.   On or about May 8, 2025, at a worksite located at 1277 Autumn Field Lane, De Pere, Wisconsin, Wisconsin, the employer did not ensure the Case 686G Telehandler operator had a current performance evaluation within three years for moving construction materials on the worksite.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Buntin Construction, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348234667.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.