Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JEFFERSON INDUSTRIES CORPORATION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of JEFFERSON INDUSTRIES CORPORATION in 6670 STATE ROUTE 29, WEST JEFFERSON, OH 43162 (NAICS 336390). OSHA activity number 348234931.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Jefferson Industries Corporation — free Get an email when a new federal OSHA severe-injury report for Jefferson Industries Corporation is published. One employer, no account, unsubscribe in one click.
Site address
6670 STATE ROUTE 29
City
WEST JEFFERSON
State
OH
ZIP
43162
Mailing
6670 STATE ROUTE 29, WEST JEFFERSON, OH 43162
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336390
Employees
754
Ownership type
A

5 citations on file for this inspection.

1910.37 B04

Serious Gravity 5 3 instances 754 exposed
Issued
Sep 18, 2025
Abate by
Oct 23, 2025
Penalty
Initial $8,040 · Current $5,628 Reduced
29 CFR  1910.37(b)(4): If the direction of travel to the exit or exit discharge is not immediately apparent, signs must be posted along the exit access indicating the direction of travel to the nearest exit and exit discharge. Additionally, the line-of-sight to an exit sign must clearly be visible at all times.  a.  On or about May 8, 2025, exit routes located in sections E, F, and G of the production facility did not have exit routes that were appropriately marked to indicate a clear direction of travel. As a result, employees were exposed to serious injuries in the event of an emergency.
Recent events (2)
  • — I (S) $5628
  • — Z (S) $8040

1910.132 D01 I

Serious Gravity 5 2 instances 754 exposed
Issued
Sep 18, 2025
Abate by
Oct 23, 2025
Penalty
Initial $6,431 · Current $4,502 Reduced
1910.132(d)(1): The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall  29 CFR  1910.132(d)(1)(i): Select, and have each affected employee use, the types of PPE that will protect the affected employee from the hazards identified in the hazard assessment;  a.  On or about June 5, 2025, employees clearing scrap out of Lasers 11 and 12 were exposed to cut and puncture hazards while manually loading and moving scrap metal.  The employer did not provide employees with and require them to use cut-resistant PPE to protect their arms and legs from the sharp metal edges of the scrap material.
Recent events (2)
  • — I (S) $4501.7
  • — Z (S) $6431

1910.178 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 18, 2025
Abate by
Oct 23, 2025
Penalty
Initial $6,431 · Current $4,502 Reduced
29 CFR  1910.178(a)(4):Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturers prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.  a.  On or about June 5, 2025, employees used a Toyota Electric Forklift Truck, Model 8FBCHU25, to lift scrap metal baskets weighing approximately 469 pounds from Lasers 11 and 12.  Employees were exposed to stuck-by and crushing hazards while directly attaching lifting slings directly to the forks  of of the forklift, known as free rigging, to raise the baskets approximately 4' from the floor. The employer did not seek approval from the equipment manufacturer and ensure that the lifting slings did not affect the safe operation of the forklift.
Recent events (2)
  • — I (S) $4501.7
  • — Z (S) $6431

1910.184 C01

Serious Gravity 5 2 instances 1 exposed
Issued
Sep 18, 2025
Abate by
Oct 23, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.184(c)(1): Slings that are damaged or defective shall not be used:  a.  On or about June 5, 2025, employees used a Toyota Electric Forklift Truck, Model 8FBCHU25, to lift scrap metal baskets weighing approximately 469 pounds from Lasers 11 and 12.  Employees were exposed to stuck-by and crushing hazards while directly attaching lifting slings directly to the forks  of of the forklift. The lifting straps had damaged webbing with multiple points of fraying and abrasion.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.157 C04

Other-than-serious 2 instances 754 exposed
Issued
Sep 18, 2025
Abate by
Oct 23, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.157(c)(4): The employer shall assure that portable fire extinguishers are maintained in a fully charged and operable condition and kept in their designated places at all times except during use.  a.  On or about May 8, 2025, the fire extinguishers on the K2 and M2 columns within the production facility were permanently removed from service, but the signs indicating a fire extinguisher designated area remained in place.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Jefferson Industries Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348234931.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.